Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!
Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.
found a bad fuel pump on my 802a
anone know a part # or suplier for it??
it's made by facet but has no # on it
24v of corse, 1/4" pipe fittings in & out and then to a/n fittings
it's the cube type pump, not the round one...
as always, thanks in advance for all the help..
d.
I found a bad relay, the last one on the right side/end of the relay bank..
it was a sigma 68r3-24dc-sco this crosses to a idec rr3b-ulc dc24v.
I haven't been back to replace & test it, but will asap & let everyone know...
maybe when the 802a's start to be more common this info will help....
I was starting my 802a it runs great & has for a while, now it runs & makes power at the recep. on the side BUT, when I flip the ac interrupter switch nothing happens..
I looked for broken/loose wires ect. I even pretended to be a private & flipped the switch while not looking thinking it might...
thanks
thanks so much that is the info we need & can look/print off of liberated manuals
it's great to have so much knowledge all in one place & such helpful people that take their time to help a fellow ss member in need...
I'm helping my dad with a gen set it's a sf-5.0 md can't seem to find a tm or operator manual.
he's a marine & a&p so getting it running was not a problem but would like to have spec's & proper operating instructions....
as always, thanks in advance for all the help....
what I learned
I have an 802a I have learned all kinds of lessons
#1 steel soldiers is great, lots of help for people (me) who know little or nothing
#2 read,read,read get all tm's possible, liberatedmanuals.com is great & free
#3 listen these guys ( I didn't check my fuel lines as well as I...
mep 802a system
I have a camp site with 2 travel trailers, we used the 802a in a 20' conex, cut air vents & ducted the cooling air & exhaust out the side
we ran underground to a breaker box with breakers for both trailers, works great..
used a 50 gal truck saddle tank to feed the aux fuel...
thanks for all the help, now that I have #'s they cross to wix #
napa 1374 =wix 51374
baldwin bf1226 = wix 33472
baldwin pf847 = wix 33348
hope this helps others...
thanks again, d.
I have several types of these they work great for all kinds of pulling, frame work ect, works great to pull conex boxes together for tight placement....
frisco
I registered mine as an antique & have driven in frisco, hauled limbs ect.
no problems with the cops, but I have yet to leave it parked in front of the house..
frisco cops in the most part are ok guys....