Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!
Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.
On occasion, one of my renters will redecorate and dump the old couch by the dumpster. The trash guys don't always pick it up so speed the process, I put it in the dumpster. In order to get it in the 2yd dumpster it needed to be broken up. What better way than to crush it with the deuce. One...
Here are the pictures of the hubs installed and painted to match the truck. I ireinstalled the rear most drive shaft and took it for a test drive. I also removed the tow bar from the bumper to its new home in the bed. Steering (with the air assist) was noticily different (easire) most likely...
My deuce fits in with the ring and convoy lights with the metal guards on them but not the gun cradle. I am running 9x20's and lowered the ring mount to just above the canvas top. I had the building before the deuce came into play.
Go higher, you may want a wrecker!
Not sure about filling in the 2x4 and 4x4 designations. Maybe in the future "lock "and "free" could be a consideration. It dosen't matter to me either way. I wanted the lock-unlock capability so what it's called dosen't matter to me.
I just received my new lock out hubs from John Tennis and here are a few pictures of the hubs and measurements showing the difference in height compared to the stock hub. The "kit" included replacement hub gaskets, instructions, and 2 hubs. The instructions mentioned removing the hub top cover...
I replaced my zipper boots with new one piece boots from Teds trucks and 3000 miles so far with no problems. Now if I can only find the time to extend my slobber tube and cut down on the mess all over the front axle.
RE: Re: M66 Ring Mount
I was fortunate to locate an NOS complete leg kit that included all of the pieces except the cab reinforcement plate and the ring. I aquired the ring separatly along with the cab plate. The leg kit also included 2 brackets to mount ammo cans to the ring mount along with...
I chose to tow the trailer with working tail lights but the landing gear would not drop down. Both trailers were stored with the lunette touching the ground and the landing gear stowed. The fork lift raised the trailer for towing and I held it up with the high lift jack. When Jacking up the...
The trailer was loaded by fork lift lifting on the box from the back and a come-a-long was used connected from the lunette over the top to the fork lift mast to prevent the trailer from falling off the lift. The fork lift had an almost flat front tire but the operator was able to get the...