Search results

It's bolted about 4' from the cab towards the back. It's about a foot in front of the rear axle. I'm trying to post more pics but it's not letting me.

Couple pics of the seats and the mounts, its just 2'' angle bolted to the seats with some tabs bolted to the cab.

Thanks! Any seat in my opinion is better than the stock seats, get them suckers installed, your back will thank you.

I really appreciate it, taking my time and making the truck better and more useful for my needs was the goal. Still a lot of work left but at least it's a running driving truck.

Thanks for all the complements guys.

If in the cab you can only aim front right, on the step the barrel can be aimed more towards the front of the truck. This is version 2.0, improvements could be made.

Some Toyota Tacoma's and 4 runners and a lot of Ford trucks come with electric locking rear diffs. Jeep Rubicons and Dodge Powerwagons have electric lockers front and rear. GM has equipped there trucks with the Govern lock, Eaton G80 mechanical locker for something around 20 years, there new...

I will get some detailed pics of the seat mounts tomorrow. They do mount to the back of the cab, the seat bottoms fold up flat too, kinda neat. They came from a military vehicle, just not sure which one. I was told MRAT, but they look nothing like other seats I've seen.

Found one more, seats mounted. Mastercraft suspension seats with 4 point harnesses.

I will get some more pics up tomorrow.

T case pto and Braden 30K winch Swivel rifle mount, you can shoot from the passenger seat or stand on the step. Not sure why they are sideways

Front clip mounted, had some random rust and dent repair along the way. The cooler on front is for the power steering. I had to move it later due to the grill. Rear tires mounted Got the front axle in and mounted the tires, had to roll it outside after 2 years of sitting in the same spot...

I only have experience with the thermal barrier stuff and I like it. Sprayed 4 vehicles now and it does help with heat, but does not hold up like bedliner, areas such as the floor pans will wear quickly. So I'd advise painting over it in those areas or running some kind of a floor mat over it.

Snorkel dash installed with the new column and steering wheel with a quick disconnect Front lift mostly done, sorry some of these are out of order Rebuilding the axles, rear hubs where flipped, this was a mess!!!

Thanks! Yea, me and my buddies love the toys.

Most of the drivetrain mounted along with the on board air hose reel. Custom steps Painted everything under the cab Rust repair and fixing the crushed cowl on a third cab I found, the other 2 where too far gone due to rust Lizard skinned the bottom of the floor firewall and interior...

Installed engine and painted it, then put on some spin on filter conversions

So, over 2 years ago I got the wise idea I wanted to bob my M35. I pull the bed and discover A LOT of rust on the frame, it was less than 1/8" thick where the factory rear suspension was riveted on. Upon further inspection, my parts trucks frame was in great shape. This turned into a full on...

Detroit truetrac uses helical cut gears instead of clutches. It works really well, even off road it works almost like a locker unless you pull a tire. Only problem we had with one was the ring gear bolts backed out even after being torqued with red loc tite. I'm sure that wasn't caused by the...

You didn't crash into the ditch?