Search results

Thanks friends!... Will post some more in the spring when it warms up...

Yes, no wreckers!..maybe a small one!..hehe.. Yes $3.00 a loaded mile, nothing north of PA Please in the winter. I like to head south. Kevin. I like to do Ft-meade pickups basicly. decodeme@verizon.net

Thanks for all the info, I uped my reg Gcwr at the MVA from 33000 to 44500. When i stop by the DOT for info, they tell me they are concerned with the tire ratings, Modifaction to the truck (air bags etc) truck and trailer ratings. With 20k I was fine. I have loaded the trailer with 20,000lbs at...

Load Max 24000 lb with 2 12000lb axles. The truck has be upgraded with 19" michelin G rated tires, 5000lb each. Also subtract the goose neck weight, i prefer a 30 / 70% mix on the load. The truck can carry up to 10,000 lbs on the goose neck easily. Airbags are in the near furture. The trailer...

The trailer is a LOAD MAX rated for 24,000 pounds and the M923 is like 23,000 pounds

Hey guys, If you need a 5 ton or lighter equipment hauled, My son or I can do it. We do have a 16500 lb winch for hard to move items. We do this part time, so we like to stay within 500 miles, But..... Kevin.. ps, dont pm me..i dont check it that often.. decodeme@verizon.net Yes its all legal...

Thanks sewerzuk for all the info! Will wait until the new Video is made!.... Kevin..

I had the same problem, had to bend the line to get it out of the tank, once i soldered the line i had to cut it a bit to get it back into the tank, did not want to drop the tank to get it out and back in. It drove me nuts too!.. I took the whole system apart and resealed every line. Still same...

So, I need to follow the directions in post # 40 below, not as in the video?.. "I cut the buss bar that connected T10, T11, and T12 together and ran the jumper from T12 to T3, I created a floating neutral inside of all of those components. This explains the strange readings I was getting on...

U Da MAN!..wow..been following this post for days...i cant wait to try this on my 20kw 4 cly gen. I took my mep-005 30kw off the house and installed the 20kw i got from GL. The 30kw at full load from my house did 30% on the load meter max. heat pump, compressor, EXelary heat etc. also pu tthe...

Is the mep-005 30KW generator the same instructions? and degree's? IS #1 cyl the one closet to the fan?.. I follow this but set the timing at 16.,.. did not start. I was told the mep-005 is 6 degrees? Not sure who is right,.,... thanks!!!!!.. Kevin...in maryland.

I will be heading back from albany Ga dec 3rd...email if the tire is close by...Lothian Md. 20711 kevin.. decodeme@verizon.net

Hey Jodeuce, I have 1 deuce bed , no rust including the tailgate for $500... 20 mins from the WoodRow Wilison Bridge near Andrews AFB... Zip-20711 decodeme@verizon.net Can deliver if needed.. Got 1 really nice deuce also!//

Got a empty 24,000lb trailer running empty from Gonzales TX. to ALBANY GA. DEC 4th-5th...Sunday,monday Kevin.. decodeme@verizon.net dont pm me.

Thanks Guys, As they say , its been a labor of love!..Its really cool after 2 years hearing those rotor blades beating the air! I swore I was not going to sell it until i got it running. So maybe next will be a harrier Jet!...I wish!.... Got alot of very cool photos... Kevin... ps, Its been...

Hey guys, thanks for the great comments!..Took 2 years and alot of work but she is almost done. This was a test run and she did it with flying colors!..so to speak..My labs cant wait to go for a ride..I had to chain them in the truck bed to stop them from jumping in the back when we were firing...

Marines Hueys only marked a X on the windshield, with a greese pensil..no other sites.. kevin..

Hey guys, just a update...check out my video below..just got her all fired up.. Did i fly her?....yes and no...im not allowed to say....You decide. kevin..

Hey Guys, Have a friend who bought a M35A3 with a good GA. Title. He cant get NC to accept the 6 digit Vin and give him a NC title and reg to drive it on the road. Anyone got a M35A3 in NC?... Kevin...

Thanks Joe, Got this m923a2 with a bad axel seal. make a hard right turn and dump oil all over the place.. I will have time next week to do some research...converting the number to a more common seal.. hopefully... Kevin..