Search results

Keep the tank I'll take the veterans! :-D (That really is a sweet tank that you have)

I await your build PIC's with great zeal.

NEW GOVERNMENT DATA/INSTRUCTION PLATE "Never park your trailer between two fast growing trees for any length of time" :nothingfunny:

I prefer SS, but there is E-Bay, and a load of other sellers on the internet under M35A2, M35A3, or military truck sales. I bought ny first MV from e-bay , but if you have a nearby GL military base where you can actually preview the vehicle you may get a better price but a lot mnore work.

Expensive for both. I have seen power steering kits advertised from $1200-2400.00. And I would not get AC unless I had a hard top. Just my two bits

Zout, the patient compartment heater was a chore. Had to make the muffler, mounting base, and exhaust pipe. Had to run fuel line from heater fuel pump to gas tank and wired in a control box and themostat. I used a 24 volt drop down circuit board to reduce the voltage to 12 VDC for the...

:grd: I have far to many pictures since there was so much work involved in restoring all the latches, installing a Southwid personnel heater for the rear compartment, all new compartment wiring, the B/o curtains. the lighting, the tie downs, footman loops, and on and on. So here is the...

The vents were derusted and primered and installed. The floor was restored and reinstalled with stainledd steel hardware after the exposed framing was derusted primered and undrcoated. Then the entire back was prepped and primed for the finish color of Sea Foam Green Mil Spec paint.

After finishing the base on the drivers side (redid all exposed frame, put in new shocks, new fuel line for rear heater, electric fuel pump, etc) finished insulation.

emmado22 That would be to easy! Thanks Emmado.

Thanks Tim I trhought there was a little difference I had read somewhere before. THANKS ALOT Tim

I forgot to add the picture installing the insulation.

More to come later

After removing all the rear internal oarts and pieces from the donor vehicle I had to re install them (after restoring the parts) in the finish vehicle. This is an example of the passenger side only. This had to be repeated for the drivers side and the entire cab interior as it to had no...

I replaced the passenger glass, drivers window rubber insulation, and passenger door glass, frame guides, felty and both doors rubber insulation . Then this is the back before restoration then loaded with parts and showing the result of installing two new blower fans, new wiring, to the...

I will be posting the restoration work I jave done on a M43 I purchased. I am about to finish the exterior and thought I would begin this thread for those who want pictures, pictures, pictures. Its not a deuce (I also bouighta M35A2 that I need to finish) but it sure required a lot of work to...

The SS member who does this goes by the handle "CARNAC" on this site. He requests you donate to SS wqhen you receive the requested background for your vehicle. Do a search for CARNAC posts and you will find it.

I am ignorant as to what has caused the problem with the TM link. Just thought this might help the site if it was a case of expensive software or the likes. And it is good thing to support the site anyway. I certainly hope it is not a slacking issue...

SS is still the premiere site for military iron. I have found none better. But, I do have to say that the loss of the TM's availability to upload new manuals as well as download them is a big set back. I hope we can get that link back up. So I am going to donate some $ to the site to help...

THANK YOU TO THE ORIGINAL POSTER ! I may have an excuse to buy a 5 ton recovery wrecker truck that my wife might buy into. I am sure she would not want to pay for towing Baby Huey home if it broke down somewhere and left me stranded. Or maybe not?