• Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!

  • Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.

Search results

  1. machinist75

    Bed Reflectors

    I believe there are 4 red ones on the rear corners, and 4 yellows on the front corners.
  2. machinist75

    24v power inverter for my 923A2

    I used a Pyle brand power inverter. They are cheap on amazon and I didn't have a problem with it. I think it was about $30.
  3. machinist75

    Steering column change

    One of these. But it would make it easier to get to and Hotwire. http://saturnsurplus.com/electrical/0868.htm
  4. machinist75

    Steering column change

    You could leave the old switch in its place and use one of the milspec angle brackets, like the ones that are used for the convoy light switch and put it under the dash. That way no hole drilling leaving the dash stock and you can always go back.
  5. machinist75

    Steering column change

    Let us know how to wire it up if you don't mind, for us electrical dummies.
  6. machinist75

    Deuce Transmission Removal Crossbar

    I may be wrong but it looks like you have a piece of aluminum tacked up on the back side. Be carefull of that if it comes loose, it may want to roll. If its steel my apologies.
  7. machinist75

    Steering column change

    As the Spanish would say, Mas cool.
  8. machinist75

    Steering column change

    Yeah, but it wouldn't be as cool.
  9. machinist75

    M36a2 M146 idea

    What he said.
  10. machinist75

    Steering column change

    Would this one work. It says it needs only a 5/8" hole, so it may fit in the stock location. I'm a wiring idiot so thanks for any info.http://www.possummarine.com/p/14515/marpac_7-1155
  11. machinist75

    Steering column change

    Isnt this one a spring return to off? Earlier in the post it was said it needed to be spring return to on.
  12. machinist75

    Behr Paint Jobs- Show me your MV's

    Painted mine a couple months ago with Olympic paints, castle stone was the color. Used the trusty old Wagner airless sprayer. Very pleased with the results.
  13. machinist75

    New Deuce owner here..

    Welcome from over in Collin county. We used to come out there on the weekends to run the quarter mile track.
  14. machinist75

    Abbot Tank In Canada

    I believe they carry armor piercing shells and their gun angles down 5 degrees for some antitank ability.
  15. machinist75

    Abbot Tank In Canada

    A buddy of mine got a abbot from England that came from Canada. He said there's a tanker training base in Canada. They use the abbots as aggressors, usually painted black.
  16. machinist75

    Has anyone found factory green paint?

    The rapco is available in 383 green also.
  17. machinist75

    M925 startup at 28 degrees Brrrrrrrr! No etheror block heater in WV

    Do you happen to know the part numbers of the block heaters you used.
  18. machinist75

    M925 startup at 28 degrees Brrrrrrrr! No etheror block heater in WV

    Do you happen to have a part number or where you got your block heater from. I'm only running two bateries and fear them running dead on the coldest of days.
  19. machinist75

    M939 ABS ECU failure point

    Can it be replaced?
  20. machinist75

    Thunderbird's M923A2 thread

    Nice lookin truck, even got you some sandbags thrown in. Bonus!!
Top