Search results

Whats not lining up? Bell to engine, Bell to trans? Or is something else hitting?. I have about 12-15 4500s all variants, Let me know whats hitting and I can prabably help And a Gasser Bellhousing will work just fine with a g.r. starter

Fold the rear leg up and tip it, it will sit on the ground with a little angle to hold the log in. Mabye? He11 I dunno.

I went with doubling the frame because I wanted it to be as low as posible and I figured by the time I fishplate the frame plus add the tube on the top it would be just as easy to go this route. The frame rails where new ones from the scrap yard. I assume they came from the local heavy truck...

Im trying, Im better with metals than I am with computers lol

Air chisle. Takes about 7-10 seconds for each one. Non intrusive as well

I wouldnt cut up a rare truck, But I also didnt think the 36 had a double frame. My M46 (same wb as a 36) dose not, It has braceing but is still a single frame.

If I could get this stupid video to upload I would share !

Not real glamorous but heres a few after stripping the frame and droping the new rail on. First pic is of the rails before they where cut. Oh yea, Fwiw. I have less than 5min into removing all my rivets :D

Well being your pretty close, I have the bumper extentions from my winch kit if you need to take more mesurments, I also have a drive shaft if you wanna copy it. Im not selling any of it but your welcome to mesurments

I was trying to slave Dave Souths Big Bird dump truck. The truck has baterys and they both had a small charge in them. I let the truck sit for about 5 min with the cables hooked up with the engine @ 1300 rpm to help charge them. I have looked the wires over before but there is a chance there...

Soooo, I have to ask. Whats the scoop on the front springs? They dont look factory.

2wd chevy or dodge?

Yea, thanks Rich....... These things have garbage charging systems lol

Ericks shows them for the prestolite..... I have the Leese Neville.... Yes, I do have a ground cable RLWM, As I stated before on here, the tm's will not download correctly for me and I was asking if anyone has actually REPAIRED the alt, not replaced parts. Repairing meaning a spec out of the...

Dose anyone happen to know the spec for the resistor? I pulled the rear cover and didnt notice any "magic smoke smells" but I am shure that is where the problem lies. Thanks DH.

I would like to know why they went bad as well as repair them. I figured I whould find the prob while repairing. I have slaved with the truck running many times with out a problem. Last year I was having charging problems with the truck and assumed today the gem finally took a crap. But when it...

Ok today after trying to slave another truck my deuce fried not 1 but 2 generators..... WTF happened? Do we have a GOOD thread on repairing the gen's? If not cant the well educated folks of SS help to assemble one? I am quite irritated and would like to figure out what is happening. Yes I...

Well bad news on Big Bird...... Driveshaft was removed because the trans is wasted. It is seized right tight. Neither the input or output will turn. Gonna see if I can find Dave a trans for it :sad: Another bummer, Trying to slave it off of my deuce roached the generator. Put another...

There the same width. I have some on the rim pile.

I can only guess you have a winch truck? P stand for pto?