Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!
Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.
I hope i understand the system correctly. I have to have my headlights in the on position in order for the turn signals to work. They do not always work, but if they start working they work fine, till I shut down and begin again, and we start all over with intermittent operation. Where do I...
Looking for contacts and friends to have fun with! Anyone from the Florida area have info on groups or get togethers this fall or winter, before it gets to HOT to even think about going outside!
I am looking to add a winch to my truck, I want something decent and serviceable, cleanup is fine, just do not want worn out junk. I will need the complete assembly. Let me know and thank you.
its spinning correctly, but obviously its loosing the pressure via some sort of leak! Is there any seals bushings gaskets or anything in that pick up area that I could be missing. All I have is an impellor, 3 shims, the end cap with a welded on strainer!
The spacers can really only go in one way, as the pump was designed, very simply! I crimped the edges and made the bottom pick up screen fit tight. The pump runs like hell, fast as lightening, no fuse issues. just wont send any volume up to the main feed line. Is there any rubber gaskets or...
I assembled it with the three aluminum plates in order, bent the bottom screen plate so it wont come apart, put it together nice and snug, bench tested it and it ran like hell, put it in a bucket of fuel and it will not prime up or pump squat. is there anything missing down below other than the...
I removed my pump on my m35a2 and found it was spinning, but had lost the screen plate bottom, and the 3 spacer plates. I reassembled it and tested it, but it still wont pump! Any suggestions?