Search results

Well I'm out since it's Bozeman Montana (over 400 miles one way)...

Actually didn't do anything to the Beast this weekend but I did pick up Sides/Bows/Cover from Gunzy for my 1968 Johnson 105-A2 trailer. Other than the Cover having been lightly used and stored dirty it's in perfect shape (nothing a bit of cleaning won't take care of) and the sides & bows are...

What part of Idaho as that could help find someone willing/able to help

Fairly easy to also put in a battery isolator with the 24v/12v converter so the 12v battery gets charged while the motor is running but then the 12v battery becomes isolated from the 24v battery bank so the worst that will happen is the 12v battery gets totally depleted (since the solar can't...

I currently have GI Rubber but when I do my next boot replacement I'm leaning towards trying the silicon version as hopefully it will be less prone to cold weather cracking

See this post on how to "bypass" the PCB to get a truck started when the pcb has failed http://www.steelsoldiers.com/showthread.php?113634-Ever-see-inside-the-Protective-Control-Box&p=1615353&viewfull=1#post1615353

Congrats to them then...one of the few to escape into the civi wild...

I would bet they were NOT UpArmored maybe a "trainer" with fake armor or as some have mistakenly think the ROPS cab'd trucks are armored when in fact they are not.

Now take him to small claims court for breach of contract. He took your deposit and failed to deliver the required documents to complete the sale....You can get your 1300 back plus expenses.

4 Flashing Lights or CHECK TIRES Flashing (Codes 44, 45) Type: Tire Leak (Imbalance) Note: RUN FLAT overrides this fault. Air Pressure Check Note that the Central Tire Inflation System is not continuously pressurized; pressure checks occur on a periodic basis. During tire pressure checks, the...

Currently in NSL UT but lived in Gilbert & Mesa for a couple of years.

Nice job getting her to help pull the PMs on it. Although I will say get her some disposable gloves because once my daughter got her hands dirty with diesel oil once that was the end of getting her to help.....something about it making her hands still looking dirty after washing them a couple...

Welcome and what part of AZ?

Congrats on a easy fix!

Yep there is a 99.99% chance that there is a Valve Stem in the wheel that wont take air via the CTIS valve. This is also a cause for the CTIS system to not work as a whole (5 flashing lights after it cycles)

With you saying the fluid that came out was nasty I would say check your Thermostat for being stuck/clogged closed AND since you stated you are not hearing your fan kick on you need to check your shutterstat

Personally if needing to still handle the large temp swing I would use Diesel approved 10-40 over a 10-30.

The M925-A2 IS a M939-A2 series truck...

And within this thread you can find almost all the others namely the -23 (field maintenance manual) and the -24 (repair parts) http://www.steelsoldiers.com/showthread.php?121487-TMs-for-M939-Series-Trucks

Here is the -10 TM for your truck http://www.steelsoldiers.com/showthread.php?121487-TMs-for-M939-Series-Trucks&p=1451104&viewfull=1#post1451104