Search results

Copied from a post elsewhere... UNCLASSIFIED// Subject: Safety Of Use (SOU) Message, TACOM Control No. SOU 08-015, "Operational"; Use of Commercial-Off-The-Shelf (COT) IBIS TEK TOW BAR (ITTB), Part Number# 2509-400-001. Item Affected M1114, LIN: T92446, NSN 2320-01-413-3793;/M1151 w/ B...

Much easier doing the removal than the install ! lol

Sounds like if the truck is gone then it is gone....failure to pickup or communicate (arrange for a different pickup date) in a timely manner..

Put my Bows and Tarp back on my Beast.

Gen set trailers were known as M116's Model FSN/NSN Axle Inertia Brake System Wheels/Tires Frame Spring Leaves M116 2330-542-5987 Straight No Tubes?? 3 in. 5 M116A1 2330-898-6780 Straight No Tubeless/Radial 3 in. 5 M116A2 2330-01-101-8434 Straight Yes Tubeless/Radial 3 in. 5...

As long as all the time lines jive (time frame of the heart attack happening from the time paid and within the 10 pickup window) your dad has good legal standing to recoup money if it was his account that purchased the item. I dealt with an issue very similar to this before. Unfortunately if...

The quick release valves are found just behind the front grill by the hinge point on the drivers side for the front and near each of the rear axles. Just follow the air lines to them from the axles. The boot mentioned is covering the exhaust port on the quick release valves. If you pinch them...

I too used the HF one and it has worked out great for me http://www.steelsoldiers.com/showthread.php?118121-Mntsnow-s-recovery-and-building-of-The-Beast&p=1511989&viewfull=1#post1511989 and http://www.steelsoldiers.com/attachment.php?attachmentid=488862&d=1397784165

Yep...Utah is pretty smooth registering FMV's :-) Welcome to the Big Green Iron Addiction.

just to give you an idea a 20 gallon air tank at 150psi contains approximately 30 cubic feet of air. Most 1/2" impact guns use 90psi of pressure so you only have 60psi of reserve working pressure which means you have about 12 cubic feet of air to use while the impact gun can work within it's...

Sorry... A smaller tank like a 20 gallon that has a compressor to keep it filled would do a fair job on your 1010.....when I first replied I was on my phone and thought it said 1070 aka Het... But I will say the larger the tank the longer you can do stuff before you need a compressor to...

With what you want to do and the size of the air tools you want to use even a 60 gallon tank will be drained before you get a tire switched out & aired up so either your going to have to run the engine so the onboard compressor can keep filling the tank or your going to have to put a gas powered...

I'm the one in NSL.. I too have done a couple of the local car shows in the Ogden, Layton, Farmington & Bountiful area :-) Feel free to come on down as I usually head UP to the Ogden area more often so I can hang around with Gunzy ;-)

That's what backup camera's are for :-)

Are the wheels connected to CTIS? If so have you disconnected the CTIS to make sure it's the wheels that are leaking and not something within the CTIS? Sometimes the easiest thing to do is place the wheel/tire into a "kiddie pool" to find a leak from a wheel/tire

toss in some diesel kleen and stir it best you can and then run it...year old diesel should burn just fine.

I would take one each of the two sizes needed for our five tons... Thanks!

My pleasure

Logistics Services Management Center

I would certainly like to attend a future event!