Search results

double posted...

Check your batteries (load tested) and connections real good. Although it might be a voltage regulator, I have seen the same happen with a battery fixing to go out, undercharged, or gone.

Hmmm...The Old Crocodile Dundee scenario...making sure what you have huh?? :whistle: Good catch and good luck!!

Even the outside is going to look as good as the inside! [thumbzup][thumbzup][thumbzup] Can't wait for the finished product!

:nothingfunny: Kinda thought it was the old lady... roflroflroflrofl

All of the fusbile links that have blown on me showed no outside signs of it being blown. As DH recommended, check with a multimeter. Good Luck!

Shame on you Warthog! roflroflrofl

I haven't seen an acrylic balloon, not saying that there is not one out there. I have used glass balloons to fair out the sides of fibreglass boats that I built, ALOT lighter than using talc as a filler. It will also not breakdown chemically like an acrylic product would, depending on the paint...

Good idea Heath, you can usually get micro-balloons at any fibreglass repair shop. I've seen then in automotive and boat repair shops or online. Make sure you use real good breathing protection as you are messing around with GLASS!

Let us know how it comes out Juergen...

You also might want to consider replacing the clutch assy, if it is original it most likely will need to be replaced... Taking all out of the way really does give you room to play and be safe. 2cents

Which model? M1008 or M1009, I assume you are talking about a M1008 with a change to 3.73 gears. There has been much talk about the following: 700R4 Auto Tranny NV4500 Manual Tranny Change out the gears The following tabs should keep you busy for a while. I used the search at the top of the...

Ditto... Shouldn't make a difference, but better to be safe than sorry...

Here ya go Welldigger... http://www.steelsoldiers.com/deuce/67711-brake-bleeding-doesnt-seem-going-planned.html I believe there is a pic of the setup for the pressure bleeder in there somewhere, I got all of my setup from the big orange store...

Hey guys, Monroe has their 3 for 4 shocks going on in September. Also, Sears has a shock install program going on until the end of October? The program is FREE installation! Just to let you all know...

roflrofl Good one PB!

[thumbzup][thumbzup][thumbzup] Nice job! What did you use for rims and spacers on the rears? What type of tires are you running?

Thanks for the write up sidel, most people don't do this any more... I know there are several people in your neighborhood that could help. Good luck and make sure you post pics on the rebuild!

Welcome to SS from SW LA bellhorspower! BTW, there is no KNOWN cure for OD sickness!:cookoo::cookoo::cookoo: Other than MORE OD! [thumbzup][thumbzup][thumbzup]

I'd like to know if this works, I was always told not to renew the acid. I was told by an old timer that the old acid and the sulphated plates were 'balanced' and that adding new acid would eat the plates out. I am really curious to see if this works! Please keep us posted!