Search results

Welcome to SS stationjj and OD fever:cookoo::cookoo::cookoo:! There is no KNOWN cure!:mrgreen: Do yourself a favour, don't use expanding foam. It will hold water and moisture and will come back and haunt you. Otherwise, what the guys above said.

Seems kinda high...Bought 7 each 1 gallon containers of Rotella at Wally World for 13.29 each... Just keep an eye open when going through the stores and pounce on the cheapest one and store it at the house until you need it. Also, 1's are ALOT easier to manouever than 5's...

Make sure you get the antirust additive for wet blasting, otherwise you will have a 'flashrust' truck. Just remember each type of 'prep' carries its own caveats.

Good idea! [thumbzup][thumbzup][thumbzup]

Errr, you can always ask Frodo how he got out...:mrgreen:

Slag in boots, down shirt, down arms...done that. The worse I did was while wedged under the dash of a car and soldering. Small (didn't feel small) piece of solder landed dead center on the forehead. Couldn't move, swat, or swipe the piece off. Just had to lay there and let it cool. Still have...

[thumbzup][thumbzup][thumbzup] For Warthog and UncleMikey! Nice Truck!!!

:ditto::ditto::ditto: Just put it back in the same place you found it. Was it free of metal debris when you pulled it out and cleaned it? If not, start looking for worn pieces in your pumpkin...

For 1100x20s, the only NEW replacement is the Goodyear. Firestone stopped making the T831 in 1100x20 last year. I have been looking the world over...I did find some 'new' XLs, in Holland, several months ago. Didn't check on the price, as I do not have a 'cheap' way to get them back...

If you are using the original deuce rims, Yes to both your questions. Also, make sure you use radial tyre tubes, not bias.

You trying to tell us something WM??? roflroflrofl

:(:(:( awe man :(:(:(

Try your local fuel distributor. They can get it, just depends on how much your willing to pay for it. You most likely will be looking at a drum at the minimum...

Nope, but I can see someone crying...I did when I had to buy only 48' of the stuff! :shock:

U-Joints out of phase or going out. The dreaded Kingpin dilemma. Front crossbar worn. Bad Shocks. Bad steering stabilizer. Those are the first things to come to mind...

Pic 8 looks like a three legged dawg chasing her tail! Glad you got her back home in one piece! Uh, you gonna carry a spare next time:mrgreen:

Rapco Parts Company Or you can go by Sherwin Williams and get some REAL CARC... Give the search function a try for the amount to purchase. The search tag is just below the STEELSOLDIERS title at the top. You might want to rent a airless sprayer, using the onboard compressor will work but it...

Try looking around at smaller oil change places. I have 2 in Lake Charles that are happy to fill any drums I give them. I have read somewhere in this site 0.50+/- is the going rate though.

AM General - AMG, sounds good to me. And, seeing as I have one..guess no more be said.

Hey G, Kroctek (Dave) is over there on that side of the pond, up in Scotland though. Might want to send him a PM and see if he knows someone down on the South coast... 4x