Search results

I might have some at the shop.

If I am reading you right the old head and IP pump housing had the head oil passage. As per TM when installing a Head into the IP pump housing that does not have the oil passage then the port in the IP housing must be blocked off using some kit. I have never seen that style IP but according to...

Yea sometimes the cut out on the quill shaft is just a hair off so as said just a half tooth one way or the other. Really helps to have a helper when there is a problem. You don't want to bend the cut washer on the quill shaft. If you don't have a wife or girlfriend you can rent them for one...

Don't know about welding something up. On the 809 series transfer case the air cylinder / rod is in reverse sprag when it is pushed in towards the transfer case. Pulling it out will be forward. If you use the air cylinder then yes it has to have the full amount of truck psi air to keep it in...

I think I was reading some where that NASA spent big bucks on a pen that would write in space. Now the Russians said no problem they took a pencil. You took a trip over seas so Alaska should be on the next to do list and it is closer to you than Europe.

I always felt if it is tight force it and if it breaks to he!! with it it needed replacing anyway. That said if you read any of my rants the right tool for the job does help.

You looked into the hole for the fuel control and the pin is not there? Sometimes buy turning the crank shaft just a tad one way or the other while some else pulls up on the head easy will get the cut out washer on the quill shaft gear lined up better. Can I ask you this did you rotate the...

If you want the used oil lines I still have three parts trucks I can pull them off of. Just let me know .

Thanks for the post but Black on gray is harder to read than the white on gray background. I almost stopped reading your post because of it. Please switch back to white.

Think I have the boots and some used oil lines but you could just get some new ones made? Will check soon.

10-4

Double check the axle vent line for being open to please. If I remember right the gear oil would have to go through two CTIS seals plus hub grease seal. Hard to happen but guess it could but you would also have a leaking CTIS in that hub. So might want to see about that. If I remember there is...

Don't see a problem with that just don't take any financial advice from them.

Don't tell me you do that. I have done antifreeze that way but could be the reason I see Unicorns when no one else is around.

Picked up the one for the OD stuff years ago and never used it. Even came with the original paper work. Do believe some have used what they got in there toy box.

I have one set left of the ladder handrail set up. It comes with the holders for the ladder and a set of holders to mount where ever you store your ladder. The hand rail you see is the one I welded the Tee pee looking thing on the top to help this old man. The one I have for sale is just the...

Heat here but it has been raining every day around 4 o'clock for the last month. The humidity by ten in the morning will steal your energy and leave you running to the house. I will never know why old people would want to move here. I am trapped with to much OD stuff and two homes. I would like...

Sorry no more Deuce camo cab covers or hood. Believe I still have one more set of double axle clamps and three more NOS air tanks plus two more Deuce drivers complete doors. Time is ticking Tanks

Sorry but Cindy only posted once in 2014 but hello's are a nice thing to do. I like Amsterdam's open minded thinking.