Search results

More

Painted the Truck Yesterday here are some pictures

I installed a caterpillar master key battery switch. Wired it between the Truck master switch and where it hooks to the starter. When this switch is in the off nothing in the electrical system including the horn ,lights, fuel pump will work. Greg

Like I said its mostly common sense. Yes use a clip on air chuck. Do not stand over or on the tire when airing up. Also if you are not comfortable with them and the maintenance by all means don't use them. I am more Leary from small car tires the sound they make when they pop on the rim I...

Fixing a flat on a split rim is NOT a hard thing to do. When I was 16 years old my after school job was fixing truck flats for a local fuel distributor. The most dangerous part is airing them up once they are fixed . One way to do this is to fix the flat and if it is on the rear of the truck...

Cant help you on the starter switch. I know that Satern Surplus does not have Dipsticks Cause I also needed one But Memphis Equipment does.

Twenty dollars. I know :D I got all he had.

Santa came late this year in the form of a good friend. Today I got a Gallon of DOT 5 brake fluid still in the Military plastic jug the foil seal still intact, a trailer pigtail. 2 rear stop/tail lights. 10 fiberglass up rights , 10 corners and 5 bows all for just 20.00 dollars

Slow cranking Wednesday Night hooked both of my Volt meters up 1 on each battery, set them in the seat climbed in and hit the starter button. Back battery dropped down to around 10 volts Front battery dropped down to 2 volts then in to negative numbers. Took front battery back to battery store...

I have noticed that the last few times I have started the truck that it turns over real slow Always started and after you worm it up for the rest of the day it starts fine it acts like week battery's. They were new back in the summer. It cranked over fine right after I installed the motor It has...

12

I was thinking that it might be a JOB. I will soak em good with penetrating oil and you are right 1 at a time.

Pistolnut I got them from White Owl Motors. They allowed that they only had a few sets left, These are NOS complete in un opened boxes. $235.00 Kind of steep but What are you going to do.

Sure send me the pins and when they get here I will swap them out and send you the arms / pins, supports and Mirrors. You can have them Free.

The ones on the truck now have a curved flat piece of steel that is welded to the windshield hinge pin and a rod attached to the bottom door hinge . The mirror is a 8x10 with a single "L" shaped rod out the back bolting to the flat bar.

Not really sure if you back track a couple of pages there some photos of them on the truck in the topic "109 box"

Hi All Got my set of West Coast Mirrors today will install this weekend. Any Tips, Tricks or advice on these? Thanks

Pre run check list decal Got Mine today the are top notch. Will install them after a new paint job this spring

109 box It is a nice box and if I don't sell it, it will probably be a way down the road project. There was a thread a while back where someone built a trailer out of one I kind of liked that but would take a lot of work. It has all the glass and the window black out shields windows open and...

109 box The box is good condition it doesn't have any of the electoral connections except for the 24 volt stuff. Has all the windows doors close and latch. Will try and post a photo.