Search results

Framed in one side of the dining table seat. Installed the 12 volt power supply / battery charger. Finished the propane plumbing and tested the water heater, stove and refrigerator. The heater needs 12 volt power and I am not that far along yet. last time I tried to light the heater I caught...

Insulated inside the propane storage and behind the 40 gal. fuel tank. Cleaned, panted and installed the roof top air. It puts my height at 12' 6" Psalms 1 1-2 1 BLESSED is the man Who walks not in the counsel of the ungodly, Nor stands in the path of sinners, Nor sits in the seat of...

Yes more pictures please! Video would be even better!

Finished plumbing water heater bypass and installed out door shower. Fired up the pump and watched the water flow. It flowed right onto the ground, still need to plumb in the drains and valves for grey and black water tanks. That will have to wait for dryer weather. (Prov 3:5-6 [KJV 1611])...

I also installed the fresh water tank, Water pump, Toilet and ran about one half of the fresh water plumbing.

Filled the seams on one side of the truck. Bought some calking made for filling split wood decking. After its dried it can be sanded.

I would love to see pictures of the drivetrain the way it is now before you clean it up.

Here you go! www.youtube.com/watch?v=CqEccgR0q-o

Welcome to Oregon

Have a 99 dodge ram 1500 with a 360, 98000 miles on it in my shop now. Guy just runs dino oil and changes it when he feels like it. heads are off for head gaskets. Still has hone marks on cylinder walls too. Has more to do with improved steel used in the blocks than the oil used. If only dodge...

I hope it's the latter.

Today I installed another window. Also this week I installed the power cord door.

I have a 5kw generator. It is really only for emergency power as we get camping sites with hookups. I want something that can power my house in case of a prolong outage. Small generators are nice and I may buy a small quite one some day and stick it in a side compartment. But I have found that...

I am going to stuff it full of fiberglass bats one I have tested the plumbing. It will keep the bathroom floor warm and the pipes from freezing.

Today I cut down the old propane compartment door to cover the plumbing access hole.

Found some rot in the upper bunk. Insulated and paneled behind the bathroom. Plumbed in the drain lines and screwed bathroom to the walls. Next I will frame the walls around the enclosure and install my electrical panel. And last but not least I extended the exhaust past the upper bunk after...

Had my third brake light switch go bad. I replaced it with a arm style switch from napa. Part no ECH SL 128

Maybe. But I would really suspect output shaft on the steering box being twisted now. You can usually see the twist in the tapered splines going into the Pittman arm. You will know once you get the shackles replaced. Good luck.

Test fit the throne room to day. Tomorrow I am going to try and wire in the clearance lights so I can do some paneling in the corner. The lack of lights also keeps me from driving the truck. I have Deuce withdrawal syndrome real bad. Old English (Acts 16:31 [Wycliffe]) And thei seiden, Bileue...

The steering problem could be because the shaft in the steering box is twisted. This is common if the front tires take a good hit in a wreck. It also could be that the pitman arm is installed wrong. They are keyed with a with some wide splines so they will go on in I believe 3 different clock...