Search results

On mine as soon as I take it out of reverse gear and it hits neutral I hear the sprag come out of reverse sprag and go to forward sprag.

Ok TM 9-2320-363-20-2 has what I need but it is going to be a pain. Took the rear tractor protection valve apart and cleaned/oiled. I will do the front valve when it stops raining,

Yea the hand brake puts out air on the treadle valve and I get nothing out of service trailer line or rear glad hand service line. It does not matter if the trailer brake is in the release position or not. The trailer parking brake line is releasing the trailer parking brake as it should. I...

Is it all right for big boys to cry? Just got the tractor hooked to the trailer for the first test and no service brakes or hand brake. I think when they redid the truck they crossed some lines. I looked through the TM's and they showed parts but not the lines and where they go. Does anyone have...

Nice. I just added 10 k to my asking price.

Sorry wrong mind set. :roll:

I might first check to see if the in tank fuel pump is pumping buy opening up the bleeder or removing the return line on the fuel tank. When the in tank fuel pump is working the air is cleared without doing anything to injection pump or injectors. This is the beauty of the multi fuel set up. If...

No tags or insurance on the 816 and she needs a little work. Also think she feels more loved here with me than banished to a lonely yard. Thanks Allen I might take you up on it. I think the 915 would have done it with dry roads and low speed but those dam annoying voices in my head would not...

I will listen to the voice of reason the 816 stays home with me. I don't need any trouble with my new 915 toy plus I need to work on the 816 and it won't get done 60 miles away. I did always preach safety when towing and the 816 can be driven to the yard some other day. Thanks.

Got the air lines hooked up to apply the brakes on the 816 no problem.

The center plug is a metal to metal fit. If I remember it was 50 foot pounds but correct me if I am wrong. You need to find out what is leaking. Myself if I had trouble find it I would cut off the tin plate the has the firing order on it so I can see the top of the head better. It's just the...

To bad the M816 is mine but putting the M915A2 to work this weekend. Have to return the wrecker to my holding yard where she can sleep for awhile.

Curb feelers thought you just put it in first and hit the fuel no matter what the problem is.

Not a 5 ton but just had to have LED headlights and new 16 inch windshield wipers a step up from 15 inch ones. Plus all new filters, grease job and check coolant chem. level's.

Replaced all spin on filters on my M915A2. Coolant on mine fleetguard #WF2077. Transmission spin on Donaldson #P550223 and front differential wix #51085. Air dryer Meritor# R950011. Engine air filter Luberfiner# LAF3551. Dash fuel pressure gage isspro and sending unit is # issR8917. Alternator...

Yep very important. Also one would think how was the machine to be used in the case of the transmission. Going down a highway at speed plenty of air flow and cooler transmission. Mud pits and mountain climbing would be low ground speed, high rpm and little air flow. Good luck with what happens.

Good find on the fork lift and motor. Does look like you had a good azz down load.

Don't know if I believe everything on the Web but found these figures on regular transmission fluids versa miles and heat. Yea I remember that same engineer Mr.Johnson aka Mr. Transynd and I had a thread from him where he stated that at the time the C4 or the motor oils were ok by him and...

Flash codes for the DDEC11 and spin on filters Here if anyone needs them for the Detroit 60 series. They put a code reader button under the dash on the Freightliner's. Turn on the ignition and read the flashes on the dash check engine light.