• Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!

  • Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.

Search results

  1. R

    M1070 Tech & Tips

    This thread needs more pictures!
  2. R

    M939 ABS ECU failure point

    Thank you, Will. I'll keep an eye out for one (or one to borrow) -Tom
  3. R

    M939 ABS ECU failure point

    Hi Will, Thanks for walking me through this. I did see that 4 pin connector under the passenger side. I think that newer Halden Info center (vs. Info "centre" that I see works on these M939's) has a 2 pin plug (no good for me). I did check both fuses and they are both good. I replaced them...
  4. R

    Draining Fuel Filter - M923a2

    The top filter (spin on) drains fine, however the larger (lower, black) one only makes a gurgling sound when I try to drain it. There is a schrader valve on the top...should this be pressed (to allow air in) or pressurized (to force fuel out the bottom) to allow the filter to drain? (didn't...
  5. R

    M939 ABS ECU failure point

    Is it more specific than the one they currently offer? http://epi.hbsna.com/products/dept.asp?msi=0&sid=62FA678531DF4B7EB0158D62777735F4&dept_id=3916&parent_id=0
  6. R

    M939 ABS ECU failure point

    Is the infocenter that you're referring to the AQ15855? Or is there a specific 24volt one that is needed for these trucks?
  7. R

    SoCal Nov 2, 2013 Saturday Trail Run in the San Bernardino mountains

    Hoping to make the next one! (before the snow?)
  8. R

    Rattle can'ing a M923

    This thread is right up my alley! I heard of a product that converts and removes rust but doesn't hurt the metal or primer. Does anyone know what that is?
  9. R

    HASSON1911 M931A1 Acquisition

    Looks like a good one!
  10. R

    New Owner, M923a1, Need some direction

    actually, the TM states the auto trans is to use HDO 10 (10wt) from -4°F to +55°F (-40°C to +13°C) and HDO 15/40 from +10°F to +110°F (-12°C to +43°C). I'm pretty sure mine had 15w40 in it when I drained it, but it has Dexron III now. Shifts are great and it runs cool. I think short of...
  11. R

    16.00 tire life

    The Michelin Inflation Chart shows the required pressures for each weight. http://www.tiregroup.com/Catalogs/PDF%20Catalogs/Michelin.pdf Page 65 is what you're looking for. The minimum pressure listed is 65psi, however you can extrapolate the pressure for lower weights by graphing the...
  12. R

    2013 SoCal Fall Rally

    I wish I could make this, but I'll be out of town this weekend. Hope to make the next one!
  13. R

    2013 SoCal Fall Rally

    Good meeting everyone. Next time my M923 will be there with bells on.
  14. R

    2013 VIN INFO Thread

    M923A2 WO/W VIN 23A3199 Registration: NL15HM (on hood) NSN 2320012300307 Bought from private seller (Southern California) From Barstow GL Thank you.
  15. R

    Storage / Parking

    +1
  16. R

    Caiman MRAP

    I wish I had one of those for my drive to work. (through south central LA)
  17. R

    16.00R20 on M923?

    Any update on this?
  18. R

    Installed a 50 inch led light bar on my M923

    Nice and bright. I bet those people on the other side of the freeway were not happy, though.
  19. R

    M923a2 Air Dryer rebuild

    Any update on the pics?
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website like our supporting vendors. Their ads help keep Steel Soldiers going. Please consider disabling your ad blockers for the site. Thanks!

I've Disabled AdBlock
No Thanks