Search results

If you move the bracket connection further out it is going to impart more leverage force on the stud. Mark

This configuration requires a lock washer of some sort as once the stud nut is torqued the heat cycles over time can loosen the nut. Special locks can be used but in my setup there were still stud threads after the nut was in place so I just used a jam nut to lock everything together without...

You really don't want to use a spacer and a longer stud as it will put more load on the stud due to leverage on the stud at the base (cantilevered). Mine has not broken but the nut loosening a tiny bit and causing a rattle. Not a great design. My alt is a 100 amp so not as heavy as the larger...

Found this engine https://m.facebook.com/marketplace/item/220142870426850/

Up here in New England it would be worth about the same maybe a little more. In pristine shape it would be worth over 2K. Mark

Whatever looks good for you. If asking my opinion it would be a no. Black or match the truck and please post some pics to see your decision. Mark

Not to say you "can't" do it but is the risk worth the reward. It's not safe to haul that kind of weight without brakes with a one ton. That's a lot of iron to come up on you if you need to stop fast. I'm just saying. Mark

Below is the one I did not buy. Could have had it for 11K and that gun mount is worth some coin. Dumb dumb move on my part. Mark

There is a guy on fleebay that has been trying to sell a mule motor for a long time. Mark

What models are they? Wow three of them. I am really kicking myself for letting a museum quality one slip through my fingers in 2020. Keep us updated on the progress. Mark

My 91 has a NP 242 but the truck had a refit in 2008. Emergency brakes are now on the rear calipers but the DS Emergency brake rotor is still there. Marl

Brake Fluid DOT Grades DOT3 DOT3 brake fluid is the "conventional" brake fluid used in most vehicles. Advantages: DOT3 fluid is inexpensive, and available at most gas stations, department stores, and any auto parts store. Disadvantages: DOT3 fluid eats paint! DOT3 fluid absorbs water very...

Wish someone found them screwing with your truck.

Hopefully they just unscrewed it. Too high to piss in the damn thing. Just jerks. Probably the best to change out the oil and when the pan is empty use a rubber mallet to try to figure if something is loose in there like a coin/coins. Good luck. Mark

Was the vent line capped off? Hopefully it was just the cooling coil in the cover so yes you could just cap of the ends going to the cooler and connect the two coolant lines together. This can also happen in the transfer case as well as other coil coolers and is commonly called a vampire leak...

Does the scenery around you start to distort when you get up to those speeds? I bet you aged a little less than everyone else traveling at those hyper speeds. "My God. it's full of stars" Mark

Very curious if those wheels fit the Hmmwv. Mark

Those are getting a bit long in the tooth but if they were stored properly and have zero sign of dry cracking then it could be a deal. No idea what the wheels fit but they do have 8 lugs. Mark

Is there a date code listed? The Good Year M/Ts are a good tire. Mark