Search results

Yes, the engine temp during these maneuvers is critical to help diagnose the problem. What rpm is your engine idling? Was the fan on when this would happen? You said you reused an old fuel filter. Tell us a little more about that. There are so many knowledgeable experienced guys here to help...

As stated the busted tip will fall into the pre-cup and shouldn't make it into the cylinder. If the tip breaks off the military just replace the glow plug and don't bother going after the busted tips. I have had a few busted tips and went after them. One great tip I got on this site was to stuff...

I'm sure most of the valves are frozen as well as the piston rings. Be cheaper to replace the whole motor with a good used one over rebuilding what you have. Damn shame. Mark

Great motor but don't forget the 4-53T Silver. The 53 series were a little noisy motor but a great two stroke with a turbo. Many 53s were used in bread trucks. They spin a little less than the 4BT and the 4BT motor has much more capabilities than the 53 series. Mark

There was also a 292 Stove Bolt and that made great power. I remember offenhauser had an intake so you could use a Holley 4bbl which was really cool. Very tough motors those old Stove Bolts. Mark

I love the old Stove Bolts. It will give you some good power compared to the Tornado and no issues. Keep us posted. Mark

What was it before coarse or fine threads? Only reason why I ask is fine threads are much stronger. Mark

These are rough numbers but good for this discussion. A 12V 100A alternator uses about 4HP so from that. 100A Alt @24v=2400W 200A Alt@24v=5800W 400A Alt@24v=9600W A 24v Alt requires 8hp for every 100A. That big 400A Alt will suck up 36HP to run under full load. A 400A Alt will put a...

I recommend the Honda EU2200i gas inverter . A little more money but such a nice quiet machine. Mark

Hook a volt meter to one of the glow plugs and rotate the start lever from off to run and see is you get any voltage to the plugs. That would be my first step. Mark

Good luck with the fuel milage. Mark

If possible weld it. If welding is no good then I would go with Gorilla hair filler as it bridges gaps well and resists cracking. Easy fix. Mark

The Clansman PRC-320 is a great super well built rig. It is also portable with the "Manpack" carrier. Mark

The label will look something like below.

Great looking truck. Love the green :cool:

Use blind aluminum rivets with rivet washers to cover the beat up corners. Mark

Lucky Lucky Lucky Mark

Lol Hit the button the same time. Mark

You are in a tough spot my friend. As they stated you can't prove it's your trailer. Did the previous owner have it on the street with a tag? Only thing I can think of is maybe you can register it as a homebuilt? Good luck. Mark

What batteries are you running and what was the voltage of the batteries before you installed them? Don't take for granted that since something is new it's free from defect. Not saying this is the cause of the problem but you have to be mythological I.e. baby steps when diagnosing. Goid luck...