Search results

The default for the clutch fan is on and hydraulic pressure from the power steering pump keeps it disengaged. If any part of the system fails the fan will stay on and cool the engine. Mark

Surprised nobody mentioned the Aircraft Dynamics gear. I have the 24v Bradley impact kit and with the torque multiplier it's a beast. Great thing is it's all powered by the trucks batteries. I also have an Aircraft Dynamics 24v very heavy duty drill. Just had to install the slave plug. Mark

I have had zero issues since I went with the red top Optimus. I also swear by the Solarizer unit to keep the batteries happy. Mark

Try to pull it by hand first to see if it moves. That amount of water is a really bad sign. Mark

1991 M998 with the 6.5 and three speed. 24 bolt wheels with the Goodyear MTRS. I try to run between 60 and 62 and at that the motor is spinning fast. Mark

You can easily pull the engine over by hand with a wrench on the alternator. Go go slow and keep turning for a couple of minutes to make sure you've completed the cycles. If it clears the above test you may be ok. If it won't move then I would pull the glow plugs, spray in the holes with...

I got mine a few years ago and just the new top and curtain off ebay for 350 bucks shipped. Crazy deal. Mark

I have this setup minus the doors but never installed it. I do have a few pics of what this setup looks like. Mark

I like those doors. Never saw them before. Mark

I also like the looks of the 24 bolt wheels and I have had zero issues with the MT-Rs. Mark

Welcome form the People's Republic of Massachusetts. Mark

So am I to understand that the reason they went with these timed boxes is to prevent the driver from over heating the glow plugs via push button? Massive and expensive failure. Mark

Damn! Mark

Hello all, Changed out my yellow label start box. Barrel relay was jammed on so it was constantly sending 24v to the plugs. I have another known good box same yellow label Natrona but could someone please explain this afterglow function please? Mine comes on at 20v then the dash light goes out...

Hello all, Just finished replacing all the glow plugs and it was a true PITA. Broken tips, No room to work. After all this I tested the box. Light came on for approx 7 sec went out Heard a relay and I still had 24v going to the plugs. I had a meter hooked up to a glow plug. I have a Nartron...

As stated I would look for a grounding issue with the blinker circuit. Mark

If you can find the spare carrier from the M37 you will be all set. I have one and it works great. Mark

Dot 5.1 is pricey and made for high performance brake applications. I use it in a car of mine with AP-Racing 4pot calipers. I would recommend DOT 4 for most uses and as already stated DOT 5 is great stuff but can settle water to the lowest point and rust out lines and is $$$. If you do change...

If you use never seize (I always do on my HMMWV) and if you are not in a marine salt environment it can be acceptable. I just hate rusted fasteners. Steel screws have problems also. A poly or rubber washer to insulate will help.. You do what you can. Mark

If someone walks up to the truck at night the camera sensors it and alerts my phone and when that happens a 200w 20K lumens flood light comes on. I wake up to any alerts like that and look at the phone and if need be I can shoot down the stairs to welcome my uninvited guest and welcome him. As...