Search results

Disconnect the green wire from the GP, use an ohm meter to check the resistance of the GP to a good ground. This is measured from the metal tab that the Green wire was on to a good known ground near the GP. A good GP should have a resistance reading around 1 ohm. A bad GP will show a higher...

Soon you will be buying ice to keep things cold. Maybe you should save some of this free ice for later on?

Having a decent set of HD tire chains is a good idea for when the snow get deep.

Great information Ken, Trying to find people that can take a logical step by step evaluation on troubleshooting is difficult. The process of elimination seems to be a lost art. More times than not, it is something simple. ON/OFF switches seem to really confuse some people. Many people are...

I know the feeling. Once I unplugged a 330 watt paging transmitter while it was still transmitting. I thought it was off the air but it was still putting out power. Any unexpected arcs can be surprising when you experience them. At least you were able to accomplish the repairs by yourself with...

Looks like they let the magic smoke out in a spectacular manner. Any idea on why they may have failed? Nice job on the repair!

Rick, The forecast is for more snow to come in the next week......

It may just be low on fluid.

Can you provide a link or information on where to have a column rebuilt for $599.

The new cards have components that are heavier duty, we added an "Additional Heat option" for those engines that will not start when warm, a Flashing Wait light option and a metal stud so one can easily add a momentary push button without any modifications to the OEM wiring harness.

Constructive feedback: I agree with Skinny, keep the electrical system stock or switch it to a documented 12 volt conversion.

3 watt, 24 v Zener

Hillbilly Wizard sells the GP cards that we have designed and made.

Took a ride up to the mountains with the M1009 to check tower sites.

In my M1009, I put 3 rows of LED lights on the ceiling. Wired them to come on with the light under the dash. Illuminates the entire interior of the vehicle. In the M1008 I have a single LED light fixture that has a switch on it.

I curious, how do you keep a garage floor that clean? It looks great!

I have used Oregon Fuel Injection for several IPs. No issues with them so far. OFI

I spent many days at Griffiss AFB clearing the runway with the roll over plows! Plowing snow at 50MPH was awesome! Lots of great memories clearing and maintaining 2.5 miles of runway all hours of the day and night.

I believe that is a 24V Zener. Not completely sure, once I get a chance to check what the part is, I will advise.

Looking at the pictures from NAPA and Classic, and doing a search on NAPA, I would venture to say that the NAPA WS6040 is the correct one. You want the switch for Non Tilt and Non Intermittent wipers. Classic Parts Wiper Switch