Search results

Center of hub to center of hub. I can calculate tire diameter. Sent from my iPhone using Tapatalk

Do you know the distance from axle to axle in the back? That might help with a rough guess. Sent from my iPhone using Tapatalk

Can anyone answer my last question, and if snow chains would fit? Thanks in advance. Sent from my iPhone using Tapatalk

It looks promising. I will have to see if I can export to solid works or another file type. Sent from my iPhone using Tapatalk

Found instructions in true web browser. Sent from my iPhone using Tapatalk

Yeah, I just have an empty white space at the top. I will try on a computer. Sent from my iPhone using Tapatalk

Does anyone know the answer to this? I have heard many times about trucks that can fit larger tires..... until you drive off road. I just need to know if I am fully flexed out and turning, if that is still true. Thanks Sent from my iPhone using Tapatalk

I use solid works as well. If I find one, I will be sure to share it with you. Sent from my iPhone using Tapatalk

Can I get a chance copy of your model? I did not see a link. Sent from my iPhone using Tapatalk

Thanks! Please let me know where you post it..... probably fits in a new thread. Thanks again. Sent from my iPhone using Tapatalk

Hmmmmm the TM said the pressures were different. Almost one set point higher in each case. Do you know what pressure your 1088 is at for each set point? Sent from my iPhone using Tapatalk

Are you converting everything to match? Are you going to swap out the CTIS controller so you get the lower pressure set points? Are you going to swap springs for the lower weight ratings? Thanks Sent from my iPhone using Tapatalk

Does anyone have detailed drawings of a 1083 or 1088 (or any other 108x)? Ideally, I would like a 3D model. Alternatively, I would like to have a dxf or dwg so I can pull my own dimensions. A detailed drawing set would work as well. Absolute last resort, can someone tell me: 1...

Do you have a write up or instructions? I prefer the push buttons, but I am interested in how the manual setup works. Sent from my iPhone using Tapatalk

Do you know the working pressure and flow rate for the electric pumps? What is the duty cycle? In my case, I am looking at 4ea 36" travel rams. I need pressure to calculate ram area and rate to know long it takes to lift my camper roof. Thanks Sent from my iPhone using Tapatalk

Do the 1400R20's clear at full compression, turning or straight (without the hydraulic fluid tank)? Sent from my iPhone using Tapatalk

How would the PTO system compare to the electric hydraulic pumps? Sent from my iPhone using Tapatalk

Did anyone ever get anything to work? Or, is this effort all dead? Sent from my iPhone using Tapatalk

I noticed the tread plate over the engine hump. Is that common on the 1088's? Sent from my iPhone using Tapatalk

Also the CTIS system uses higher tire pressure settings on the 1088. Sent from my iPhone using Tapatalk