Search results

HT4B bearing housings were never threaded, there is an adapter kit to go from T46 to HT turbos.

Installing brakes on only two heads has been done for a long time, they work, but not as well as a 3 head set up, they sound funny too. I personally installed 2 head set ups on a 50 truck fleet of Volvos that had no room for the 3rd head installation, never saw an issue with the brakes or the...

WAY more manageable in pieces! Leave the feet off, separate the two bars and one person can handle it.

There is a tool for that.....I'll get a picture And it is available from Amazon....what ISN'T! https://www.amazon.com/OTC-7402-Universal-Outside-Thread/dp/B0002SRGV6

I'll still dig through my pile of paperwork to see if I have anything left. I think I might have given it to somebody before I left.

A pulse manifold can have effects on brake operation as well as turbo turbine housing. A pulse manifold has smaller ports, increasing velocity thru the manifold and into the turbine housing. If you use a divided entry turbo with a pulse manifold, the autolash screws might need to be installed or...

Yes, coolant only in the head. Take the inlet pipe off from the cylinder head to compressor. If no coolant, it is just the compressor. If an aftercooler leaks coolant usually, 8 of 10 times, migrates to the rear cylinders due to drive angle an hydraulics the engine, if the leak is bad enough.

And, I think I might have stated somewhere that the other 60 did not have these pipes, well, it does too. Both were USMC tanks. The TMs we have are Army pubs. and do not show the piping. Without them there the pack removal would be a bit easier, they are very close to the hull.

Fan hub is correct. In the attached pics, OP, yours is circled in red, Jbulach is in blue. That is the tensioner stop. OP, yours is at the stop that is at the "Max Tension" or Min tension, Jbulach is where it is supposed to be, almost centered between the "Min Tension" and "Max Tension". It...

Rusty...TMI man! I would like to find out what the piping is. I don't think it is for crew ventilation, I do not think it actually puts exh gasses into the boxes they attach to. Maybe some type of heating system? When running, there are pulses in the piping, no soot. If anyone comes out this...

Cracked or just in need of a rebuild, the o-rings and paper gaskets get brittle. Have not seen too many crack. What engine is it? If the aftercooler leaks, the coolant can be drawn into the compressor and end up in the dryer/wet tank, remember, the compressor gets it's air from the intake...

Nope, all the parts and extras went with the truck when I sold it. I just got rid of my last stencil machine.

Available for free here in the TM section

I had one in my deuce, I got a pile of them at a scrap yard and they matched the holes in the window frame like it was made for it. Let me see if I can find a pic. My bad, as time passes, you forget things! Here is the mirror(s) I had..... https://forums.g503.com/viewtopic.php?t=99832 I bent...

^^ I agree, you are messing with your and everyone elses life around you when you scotch hobble things together like that. You need to find out what the issue is.

Here are some pics. Line art drawing, non top stop on the left, op stop on the right. Picture, top stop left, non top stop center and HVT/STC on the right.

Most had non-top stop. The way you can identify it is just like in the video above. You can see the spring. You can physically pull the spring and plunger out of the injector. A top stop injector has what looks like a giant 12-point nut on the top of it and the only thing you can pull out of the...

I just watched this...This guy is confused. The injectors are NOT top stops, NEVER do IBC on these type. Well, I guess you can do what you want, but what he said to do will cause issues.

How funny is this, My deuce was from 63RRC 950MT based out of Los Alimitos ca. RRC was changed to RSC sometime in the late 80's early 90's

I know a guy who has just that set up, want his number? He might want to off the set up 'cause it's taking up too much dead space in the garage.