Search results

A guy I know has an AM General made A2. He took it out to the desert last weekend and after 3 or so hours of trail riding, it started to hesitate and eventually stopped running. He removed the plug on the bottom of the carb and some chunks came out, re started it, drove a bit and it started...

Well then I guess that won't work. Use a large flat blade screwdriver through the hole in the flywheel housing, if the ring gear aligns with the hole.

Push down on the fan belts and turn it backwards using the fan.

Somewhere I read the compressor was an E type. If you put an air dryer on it you need to put an E type compatible one on or the compressor will turn into a giant oil pump in short order.

Very cool, subscribed to your channel! Dodge oil pans were/are less capacity, this is so it fits in the truck, glad you got a non Chrysler one. Also, did you build the engine and did what it came out of have an auto trans? The reason for asking is that with an auto trans behind it and using an...

Can I come out, drink beer and point?

Something to think about, you cannot just bolt a flywheel housing on....Is that what broke or the bell housing on the trans? It needs to be dialed in. If not, the flywheel housing will break at every bolt that holds it to the block. I have a tool if you need it.

I've been retired for almost a year....till no ISL powered MV. Is there still snow all over the place there? It was 90 in the dez this weekend, forgot all but 2 feeding devices, Magpul sights suck.

Now you need a MUTT....

The modern style head gaskets do not need to be re torqued.

Thank you sir!

So, I know it moved into where it sits now, although YEARS ago, do you think 16.2 is a fair price for a piece of imported armor in the condition it is in?

Look at the throttle lever, make sure it is breaking over or not loose on the shaft.

Craig has one of these. I believe it is a MK1 because it has the 3 doors on the turret. It has been sitting in the same spot that it was driven into since the early 90's. From what I understand, this came from a guy that had it at someones shop for a fuel system issue. I can tell you that the...

We have one. It was a bit of work to get it going. https://www.youtube.com/watch?v=bA38WfGzyes

Well, here is ANOTHER update. The tank was full of, don't even know what to call it, never seen anything like what was in there, ever. Ended up using an air chisel to remove the drain that soldier B put in extremely tight...guess they didn't want leaks? Pulled the tank inspection/access cover...

I could use it....

I was out that way this weekend, a bit farther out, close to Baker. Weather was awesome! Looking forward to seeing pics!

The shifter, starter and go pedal all seemed fine, but getting used to the brake on the far right took a few laps to get used to. I am surprised at how smooth the truck is. I would like to drive it on a road and see what it is like. Around the compound, it rattled and squeaked worse than my...

Ouch!