• Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!

  • Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.

Search results

  1. patracy

    Seeking M101 bed transport

    And I work from time to time at 285 and 75. Or whatever time you decide to come back up to GA, we could get together and I can bring it along.
  2. patracy

    10 ton Tractor

    http://olive-drab.com/idphoto/id_photos_m123.php
  3. patracy

    Seeking M101 bed transport

    The 101 bed could stay here as well as the siren for Drew.
  4. patracy

    Patracy's "SEMTT"

    I swapped the Hyd Temp gauge for a boost gauge I had laying around. The intake plumbing took a few times to get it right. I had it straight across, but that'd have been right in the way of the oil fill cap. The truck made about 4psi of boost at governed high idle in neutral. I still have a...
  5. patracy

    Patracy's "SEMTT"

    It's alive! https://www.youtube.com/watch?v=D1L6GpWaSO4
  6. patracy

    m35a2 bed on a m103 or m105 chassis

    I'd like to find a deuce bed from someone bobbing one and swap the M105 bed I have. Probably lengthen the M105 frame though.
  7. patracy

    Steel Soldiers MV of the month - October VOTE HERE!

    Need more Tank votes folks....
  8. patracy

    Patracy's "SEMTT"

    Anyone know the button a Formula 290 engine ran? I have an assortment of buttons. But looking at the 654cr raitings, I probably should keep the engine at 300hp and 950ft-lbs max.
  9. patracy

    Patracy's "SEMTT"

    Well, a later start to it today as well. I didn't get started turning wrenches until about 4-5pm today. I wrapped up about 30 mins ago. Anyhow the intake is swapped, crossover installed. My heads had the port in them, but they were sealed. From what I saw in other posts, the intake ports...
  10. patracy

    916a3

    Moved to the 5ton and up forum.
  11. patracy

    Steel Soldiers MV of the month - October VOTE HERE!

    No, tank you for voting.
  12. patracy

    Patracy's "SEMTT"

    My youngest son had tubes put in and his adenoids removed this AM. So I took the day off. I did a little wrenching today. Got the exhaust manifold swapped and the turbo on and oil/return lines plumbed up, as well as the coolant lines taken care of. Tomorrow afternoon, I'll try to get into...
  13. patracy

    Offered a set of Detroit Lockers

    I'd be interested in them for the SEMTT. Only the rears have lockers.
  14. patracy

    5 ton tie rod in place of 2.5 ton?

    Can't answer any of your questions. But I'd throw a tape measure on it first to see what the OAL is. Next measure the rod end shafts to see their OD and see if there's enough room/meat in the 2.5T to fit them. I'd venture a guess the threaded shaft is larger as well. Steve6x6x6 probably...
  15. patracy

    Is This Possible for the CUCV? "93-96 Caprice 140A Alternator upgrade *SAVE $$$*"

    Wrong pulley and I doubt it's an isolated ground as well.
  16. patracy

    Official 2014 SS Georgia Rally Multimedia SSGR14 thread

    Dang it Kenny, I want a drone now.
  17. patracy

    Issue posting pics

    Give it a try now.
  18. patracy

    MV of the Month - October Nominations

    Didn't want to incur the wrath of the Drill Sgt.
  19. patracy

    MV of the Month - October Nominations

    Poll is up! Vote for the tank folks.... http://www.steelsoldiers.com/showthread.php?130715-Steel-Soldiers-MV-of-the-month-October-VOTE-HERE!
  20. patracy

    Steel Soldiers MV of the month - October VOTE HERE!

    And the first vote is for the TANK!
113,886members
166,951threads
2,350,591posts
6,973online users
Top