• Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!

  • Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.

Search results

  1. M35A2-AZ

    Steel Soldiers giveaway sponsored by hawkerbattery.com

    In and thanks
  2. M35A2-AZ

    Front wheel bearings

    I went and found a seal, bearing, and race. The seal should rub on the race as the hub turns. If your seal has "outside" on it that should face the motor.
  3. M35A2-AZ

    Front wheel bearings

    Ok, That maybe it, good luck replacing the bearings.
  4. M35A2-AZ

    Front wheel bearings

    You can see to much metal, so I am thinking it is backwards.
  5. M35A2-AZ

    Front wheel bearings

    I am thinking your inter seal is install backwards, If I remember right. That maybe why you got water in the baerings.
  6. M35A2-AZ

    Lightweight Weapons Station Base Plate Dims?

    I just check my LWS and the main base plate is 1/2"
  7. M35A2-AZ

    New guy from Arizona

    Welcome to the site!
  8. M35A2-AZ

    The potential end of my 1958 M54A2

    Well that is sad to hear about, good luck with the replacement or repair.
  9. M35A2-AZ

    M936A2 service brakes

    That is the way it should be, the service side should just have a vent on the gladhand, but some trucks like my M923A1 also have a ball valve, (THAT YOU DO NOT TURN OFF) if you do your service brakes will slowly come on.
  10. M35A2-AZ

    M936A2 service brakes

    You need to have this vent on the front service gladhand and if you have a valve on it you need to have it in the open position..
  11. M35A2-AZ

    arizona m1078

    In AZ if the Vehicle is 25years old you can get Historic plates, your truck will be able to get them next year (2022). I think you will need a level one inspection. Castle Bravo may have more info. for you. For this year you may have to pay the commercial fees for the truck.
  12. M35A2-AZ

    M-923 start's uphill longer

    You have an air leak in the fuel line some place, or the o-rings in the primer pump are bad, or a leak around around the fuel filter.
  13. M35A2-AZ

    Photos of My M916

    They are jack stands for the trailer when he parks the trailer.
  14. M35A2-AZ

    New member introduction from AZ.

    Welcome to Steel Solders!
  15. M35A2-AZ

    M923 back together!

    Bill, Thanks, I also used bed liner in my M35's I have done and I like it.
  16. M35A2-AZ

    M923 back together!

    I also used POR15 on the floor after welding.
  17. M35A2-AZ

    Oil pooling in air filter housing

    It is coming from the Transfer case vent. One of the valves on the Transfer case is linking.
  18. M35A2-AZ

    M923 back together!

    I had a truck that was that way, I cut all the floor out and replaced it. I bit of work and welding, but you end up with a good floor.
  19. M35A2-AZ

    1954 M37

    Looks good!!!
  20. M35A2-AZ

    M35A series brake shoes

    Sorry I do not remember the cost, But I know it was less then new shoes. Any Brake and clutch shop should be able to do it. https://truckpro.com/locations/
113,886members
166,959threads
2,350,689posts
11,417online users
Top
✖
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website like our supporting vendors. Their ads help keep Steel Soldiers going. Please consider disabling your ad blockers for the site. Thanks!

I've Disabled AdBlock
No Thanks