Search results

I think with a M923a2 you will see about 7-10mpg going around 55mph with out any payload or to many big hills. My m923A1 gets about 7-8mpg and I am thinking the A2's get a little better mpg. Have a safe trip and be sure to do all the safety checks and check all the fluids.

I have a M923A1 with Goodyear's and it rides good and I have a M932A2 with Michelin XZL's and I think it may ride a little better. What was said about tires siting flat, I would for sure change them.

wow!!!! Stand back watch this!!! LOL

If you have any questions I will try to help.

Welcome and congrats on the truck!!!! We need pics!!!

You have a good one also!!!!

They weight around 425lbs. I use a pallet jack to move my tire around.

Sound like your air solenoid valve is not disengaging, I would look at the wiring from the button all the way back to the transfer case. Make sure your getting power to the solenoid. If the truck is turn off and the push the button on the shifter you should be able to hear a click from the...

Thanks for the info. I have one lights flashing all the time.

You should be able to manual shift the truck. Sound like the linkage in not working right. The M936 does die on the hills for sure!!!!:driver:

OW!!!! I have done that, but not that bad. Now I close my door when I leave to do something. On your wiring you may have a bad black box. When you turn the power sw on do you see any gauges move?

If you put the 12v on that pos post it would be 24v not 12v, That is were the ABS wiring goes and the heater 12v wire on the other pos post. Yes Red is Positive.

Sad day for USA. My Father in-law was a officer on a B52G. He had to eject out of it and was one of the two that made it out.

I have a deuce battery box with a slave cable on it that we use when we got pick up a truck I lift it into my pickup and and then I slave off of that. After we get it started I remove the slave cable truck and just run off the low batteries. If you have low batteries in the truck I think a...

:ditto: Welcome!!!

Greg, Made some plates for me, good price and good work!!!!.

If you have a Packer Hyd. Motor on your Wrecker you need to add a case drain to it. I have had to have my motor rebuilt two times now. the second time I was asked if I was using the case drain on the motor and I did the deer in the head lights thing. LOL When you blow a seal it will fill up...

I put down what the data plate listed. I think it is the empty weight plus 10k. Put the s/n for the vin.

That would do it for sure.

I just received the mounts and the 5" offset hangers in 3/4" and they look like they will work great. I had to order two sets as a min. order. If you want one just pm me, I will sell it at cost. Part numbers http://www.fleetengineers.com/mudflap031-00139.html