Search results

Here is a pic of a truck I am working on. The wires run down and back, then up to the start relay. The grd goes right to the frame under the Alt.

On each of the rear axles there are service brakes and spring brakes. The bigger ones are the spring brakes, used for the parking brakes.

The right nuts or the ones that are used for the front wheels. The thimbles are what holds the first wheel on when you are running dual wheels.

You can down load the P2P software here on SS and it will help you trouble shoot the problem. I used it a lot when I had a brake problem.

Kurt you are right fire "BAD"..

Yes you can not start it with out the key. But you can short the switch out and get it started. But that would take a little time and you would have to know about it.

It maybe the treadle valve or one of the check valve.

I would think it maybe a line that is leaking. I would turn the truck off and push on the brakes and see if you can hear a leak, also get a soldier B to help out. FYI, if your truck has a ball valve on the front service glad hand, Do not close it, it will cause brake problems. I know first hand.

When I tested my winch on the truck I had my wife run the winch and I tried to pull the cable out, did not get much out before I did not want to do it any more.aua You are right it is a 3 or 4 man job!!

They run around $50-65.

Kurt, The Colehersee switches are what I am using in my trucks, I have been using them now for a year or so with out any problems. they are rated at "Electrical Ratings 1000A,175A continuous". The switch just looks little in the battery box. Flaming river also has some good...

This is what I did on my M923A1.

It sound like they did not put the tint in it. I have started using an epoxy primer from PPG "Omni 170"

Matt, Great job!!!

As juanprado said "Welcome to the Madness"!!!!!!!

You can take the cd to to Staples and have them print them. I think it runs about $25 for each of the bigger manuals.

I have the new M939 manuls on cd and can send you one for $4.5. I take P/P. Here is the tread about it. http://www.steelsoldiers.com/showthread.php?96375-Updated-TM-for-M939-series&highlight=manuals

Thank you!! PM has been sent.

Greasy, You need a winch, pto for the truck? I have one in the classifieds for sale. Nice save!!!!

Thank you gimpyrobb for the info. That should make it easier to find.