Search results

Usually 80% Here's the thing it won't wetstack over night. Periodically load it up to rated capacity and run it for a couple of hours. That should keep the wet stacking away

Grainger or Amazon is where I've gotten it before. Sent from my SM-S908U using Tapatalk

I use a product from CRC called knocker loose. It typically makes pb blaster look like water Sent from my SM-S908U using Tapatalk

I got a compression tester on Amazon that has the glow plug adapter, save you some effort. If you use a different IP you need to set the button. They are pretty easy to rebuild, replace and time

Happy wife happy life. I have heard good things about his mods. I did my own thing, but it's nowhere close to a packaged system

It was a Sega Genesis, I was playing Sonic the hedgehog 2. It was an old console TV that was around before I was, it took 3 guys to haul it out of the basement to get it repaired, the shop fixed it inside a week and that thing stuck around until 2003.

I think I'll stick with the electrician\controls engineering route, ride systems can be annoying enough yet gratifying

I had one blow in an old tv set and it created a weird oscillation the image looked like a twisting helix. I was so upset as it happened when i had made it to a level in a video game I had never reached before.

having a single phase outlet on 3 phase is extremely common. converting a 3 phase head to single only requires some rewiring, problem is not all heads are externally tapped for it

I once was asked to proofread a tech manual for a ride, I found several errors in the general prefave section (where all the safety info etc lives). I caused the recall of every manual the mouse wrote between 1989 and 2013

Probably for the best. Let me know how I can help, or if you guys can get me known errors I can start editing

That might be a fun project to take on.

You're welcome

for the next guy, https://www.youtube.com/shorts/N5tgjSNYFco

Have you by chance checked the valve lash?

A great degunk and lacquer remover is Chem dip. However know what you are doing because its a bit like going after a fly with a bazooka. Last time i used it was on a 003 IP (same as the 002) and check valve. BUT the IP was completely rebuilt after. It was very clean once removed...

Agreed, But every safety rule and building code is written in blood so someone did, there was probably an injury or property damage, now there is another code to learn.

In the normal configuration, you can pull a breaker and the buss remains live and the breaker doesnt. When backfed breakers (especially QO) have live bits sticking out and able to hit things.

NFPA 70 408.36 (D) if youre curious.

If you are back feeding a breaker for the main you either need a bolted in breaker or some other form of Anchorage to the bus bar you cannot rely on a snap and breaker to be a back fed main Just one of those code got you FYI things