Search results

Once you get your truck put back together go to http://auberins.com and get a pyrometer you can see when hot is hot. This gauge is a must when fuel adjustment is necessary. 1 x Digital EGT Gauge with TC-KEGT Probe (Combo-EGT) = $94.00 Power Voltage Option 24V DC LED Color...

And here is a closeup of the guts! Ew! http://youtu.be/RS5lph5XGPA Ya'll never mind that hole in the hood that was my flubba bub! these kits us all factor holes no drilling required.

Ok I listened to your suggestions so here we go! for your viewing enjoyment The easiest way to Open and Close the hood on a Deuce and a Half. http://youtu.be/WeR6rs0BG04

These are LED Offroad Lights i got off of Amazon. They run 42.00 a piece and man are they bright! they operate 8 to 30 volts. http://www.amazon.com/gp/product/B00DM2K6M0/ref=oh_details_o02_s00_i00?ie=UTF8&psc=1

I want to measure all kinds of trucks when I go to Zouts cook out. stay tuned for more options!

If you forget to hook the two main latches on both sides you could have a uh oh moment but the catch in the middle does an extent job I cut a little deeper v in mine just for piece of mind!

It would push it down but it would have to be a heck of a wind to close it

Just tell her it's a safety upgrade. Believe me if it keeps us off of the front bumper and off the fenders. It's Safer!

Vehicle updates will come as I get the chance to measure and fit other kits to them. This kit only fits the M35A2 and similar trucks.

That's right it uses all OE holes. You might have to have another wrench turner around to hold the other side of the bolts but that's it. My install on my truck was the proving grounds but the kits will be in primer and all bolts included. I'm thinking of including a small piece of cable to...

I'm selling the kits for the M35A2 for 140.00 and 60 of that is just the lift cylinders. the passenger side bolts on with the air cleaner bolts the driver side bolts on with the two upper steering column bolts. As soon as I get more measurements I can make the kit fit more models of trucks. I'm...

Hey Guys and Gals! I have been working on a hood lift setup that you can open with just one finger! That's right take your safety hooks off and push the middle latch with one finger and presto! it goes all the way up by itself. even better I am going to include a cable tether so you can close it...

I won't be able to use these at night way too bright! But I'll be able to see the on coming traffic hit the ditch real well:-)

Thanks Guys That helped I was stuck in a TM vortex where the clutch did not exist. no matter where I looked it just wasn't there.

I can't seem to find the Part numbers for LDT4651D clutch parts. disc, pressure plate, throw out bearing. TMs are just making my head hurt:drool:

Would you want the cable cover to go between the bumper top and the two bolts on top of the winch or something that would just slide down the two cable guides on either side of the cable spool?

Buy a 2000 watt inverter and a small electric air compressor just a band-aid to get you home.

Yeah no doubt there tough alright but I wanted more to stand on while working under the hood and I'm adding a hide away step to make the assent to the engine bay easier on the knees.

Believe it or not it's probably no heavier than two OE bumpers two men can carry it around fine. I am willing to build the bumper that you would like to have on your truck. I built this one as a demo and kind of a hands on improvement model. So it will evolve more. So stay tuned!

It's not as low as it looks in the pictures here is a side view