Search results

the LED blackout light i bought on Ebay and i had to order two and it was pricey. the dash bulbs the is 1 in the turn signal twitch, 1 hight beam, 2 to light the gauges, 1 in the transfer case air switch and if you have a low air warning light then one more. 5 or 6 will work but i order a...

got my LED blackout light in and installed it works great. still cleaning and painting for the front turn signals.

i got 49 to 50 without hinges standing up on the bathroom scales. about the same as gringeltaube. sorry it took so long i had church last night.

you are correct. but, if you were going to be doing that for long you would need one 7734 of a solar system and inverter to run a saw. genset? :D

Anytime :beer:

Thanks. :D

rustoleum rattle can bed liner on my winch, bumper, grill guard, shackles, hitch and bumperetts.

i bought them and installed them on my LED headlights and when i went to install them the little bar in the grill just under the headlights was in the way and i had to take them off. i am going to unscrew the bar and drill new holes to lower it, but, i am in the middle of some other projects on...

i have the 18 volt Dewalt circular saw that does almost everthing i need. it will cut treaded 4x4s.

i have a post "My M109a3 going 100% LED" that has the web site i bought them at. i think they are brighter but i don't have any proof. http://www.steelsoldiers.com/deuce-modification-hot-rodding/76024-my-m109a3-going-100-led.html i have had the see through green ones for years. the gauges...

see if you can park a rv in the driveway and if you can convert your M109 to and rv and register it as a rv, thats what i am going to do. if not buy you an M1008, M1009, M1010 or M1028 and park it in your driveway, thats what i am doing now.

the back of my dash gauge cluster is the same color as the front. if i remove it again i will paint the back white or something shinny. i also am using see through covers on the dash to have a little cab light, not for a work light but just to see if i have to grab something. the covered covers...

thats why i registered all of mine as trucks and not historic or FMV plates. i can jump in any of mine and go anywhere at anytime.

try to get as many things 12 volt as you can to avoid the energy that the inverter uses. Dewalt makes a battery charger for its tool in 12 volt, there are 12 volt coffee pots and 12 cords for most lap tops. there are even 12 volt TVs. in my barn i have two 60 watt Sunforce Solar sets of...

converted all of my inside lights to LEDs along with my license plate light. already had LED taillights and headlights. working on the front LED turn signals and LED black out light. going 100% LED.

2 light the panel, 1 for high beams, 1 for transfer case, 1 for turn signal switch, and mine has 1 in the middle for low air pressure warning light. there is a link in post #5 for the bulbs. they come in red, green, yellow and white. they also come in different voltages so watch out. i...

the sunforce panels (2 at the barn and 1 at the well house) have been outside for 2+ years with no problem. if it was sandy and windy where it could etch the glass i would put up some protection but i have had nothing but good luck. the ones from harbor freight not so much, i had to replace...

i will try to get you one tonight. bathroom scale and a hood in the garage.

got her nested safe and sound between my M109a3 and my mechanics M35a2.

if you plan to run a 4000 watt inverter and use it for long or very often you will need several panels to recharge if you are going to use often and several batteries to run long. on my M109a3 i plan to have 4 optima deep cycle batteries, 12 volt altenator, and several panels mounted on the...