Search results

At 10 bucks I keep a few temp sensors around now. Its easier then ohming out to check values. part# wt300, or su109.

On a m1008 we have I was going through glowplugs in a short time. We changed relay and card. We watch the wait light and it would come on for second even when warm as you were driving . You would catch it out of the corner of your eye? I put in a new temp sensor and all is good!

Be careful there are later 6.2 pans that fit a one piece rear seal. There is a write up on www.truckstop.com call oil pan tech.http://www.thetruckstop.us/forum/threads/oil-pan-tech-for-6-2-6-5-engines.25515/

3M weatherstrip adhesive! in autozone,napa,advance

There should be 3 grounds at the rear on the passenger intake manifold. 1 to the negative buss bar and 1 to body and other is a wire harness ground.

I would buy 2!

I went the rockauto route of changing the bosh tips with no problem. There is a way of setting injectors to pop the same with little wafers. I just took each apart ,and put back with same parts. A total of 70 bucks they work fine!

Check the stem for sure. I had a rim that baffled me and I throw the whole thing in the pool and it turned out a small icepick hole in the sidewall!

I have the very same batteries in one of my trucks with no problems. they even made duplicate receipts and put in shipping sleeves on the side of each battery

Welcome!!!

On the tail piece on pass. side is the speedo cable and towards the pass. side on top is the 4x4 light switch.

Sharecroper, I have 12 bolts on 2 trucks with spacers front and rear. Yes I used red threadlocker. I purchased blem spacers from rough country as they only were scratched up. Ive gotten the valves from different places ,the cheapest is any where they sell plumbing parts it the same as a well...

That's the water in fuel diode on the engine bay side, another is in the cab its the gen2 diode.

Set up a account at rockauto with your email and your trucks as favs. About every 2 moths they send your a email with wholesale closeouts. I got rear shoes for 10.00 a set and they were wagner thermoquiets and the fronts were 7.00 a set. I ordered the hardware for the rears it was 1.79. When...

Rich, That's a super idea! Unlike when I reched out to a fellow member to borrow a glow plug extractor and was supplied with the web site he purchased from. Tim

PM sent

Welcome! Im in Point. Tim

Sir, you are correct that's the sensor. You best bet is napa. It has to be ordered but will 39 bucks instead of 80 bucks or more elsewhere. part # ts7265

Ditto on the westernly route through V.A. out of M.D. take rt 15 to rt 29 south into N.C. Its a decent ride and just enough population for help if needed.

Welcome from jersey shore!