• Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!

  • Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.

Search results

  1. timarr

    Rust!

    Jeepsink, That lip is really the rocker and the floor pan laps under the rocker. If you buy a 6 buck spot welder remover and drill out where you see the little dimples they come apart. its really pretty easy.
  2. timarr

    Oil Pan gasket replacement

    felpro# os34400 I like victor#os30591.
  3. timarr

    Rust!

    I ve done 3 trucks and used a site called raybuck.com. Cheaper that lmc those shipping is crazy!
  4. timarr

    Clamp less fuel return lines

    I have removed to service a injector and it did reseal ,but don't know how many times you can r/r . So much easier then those dam little clamps!
  5. timarr

    Clamp less fuel return lines

    I wouldn't make a habit of removing or your going to have to recut end so it will grip.
  6. timarr

    Clamp less fuel return lines

    Yes, Ive have them on 2 of my trucks, about 23 bucks shipped from auction site. Make sure you buy the german made stuff!
  7. timarr

    new shocks

    New gas shocks from rough country are only 39.99 each. well worth it!
  8. timarr

    Balancing 12 bolt wheels?

    G. Im interested in the way you turn down the runflats? Tim
  9. timarr

    Balancing 12 bolt wheels?

    I used seamless airsoft bb s . 20 oz in each wheel and they balance out with 37 oz s on they. I did ditch the runflats.
  10. timarr

    Hello From Reading Pa

    Welcome from the Jersey Shore!
  11. timarr

    Need some quick bodywork advice.

    Carve seam sealer out ,wire wheel rust, use rust converter, paint and reseam seal. seam sealer can be purchased at napa about 20 bucks a caulk tube.
  12. timarr

    Oil Leak. Im confused. Please Assist.

    +3
  13. timarr

    Would this glow plug relay work?

    Yes, using them on two trucks!
  14. timarr

    Cucv m1008 blow by

    Also the system is like a sealed unit if you have the air cleaner top off the blowby is greater. Just make sure everything is fitting right and as 2002ford stated if nothing out of the tailpipes drive and enjoy!
  15. timarr

    New to the world of 6.2

    As 2002FORD stated it takes a bit of cranking don't give also take a break every few minutes to let starter cool. Also make sure the batteries are fully charged as it takes a fast crank to compress that diesel. GOOD LUCK!
  16. timarr

    Best lift for a 86 CUCV so I can fit 37" Humvee tires I feed cows with

    I have done a few with rough country 1 ton lift kit 469.00 I add on a sway bar drop 35.00. steering stab 28.00 Then I toss the 4 inch blocks and use a Gatsby shackle flip for 80.00 . that's a total of 650 for all and some will tell you its not the best kit but to each his own.You do need 6 inch...
  17. timarr

    Hello from South Jersey

    Welcome!
  18. timarr

    New Guy in NJ

    Welcome!
  19. timarr

    came across a m1031 today

    Mike let me know about the box? Tim
  20. timarr

    Dealing with a wreck

    You always have a right to have the state police to get involved. My son was riding a bike and hit by car. It took two weeks to get report in meantime he was issued a helmet ticket. When report was produced no witnesses either and was not detailed. I requested a meeting with chief,traffic...
Top