Search results

you can get a speedo adapter from a m34 but they are hard to find that would put your speedo right since they had 11.oos on em stock

get a speedo adapter from a five ton boyce has em my speedo is dead on with the 15.5s

ya seen them. cool but everything gets stuck if you try hard enough :-Di drove through the same hole a week late after i singled the truck out right through no problem:roll:i'm gonna take some video and pics of how hte truck does now with the 15.5s when the weather gets better so i have some mud...

singles are better for everything except sand .sand pushes up between the duals and prevents them from sinking 11'00 single have the same capacity in the rear and more on the front than 9.00 duals but if you go with any bigger tire the capacity is way greater with singles my 15.5s are rated at...

i use a tub for mixing concrete its about 24inch by 40 inch and about 6inches deep it holds about 15 gallons and there is no chance of missing or it tipping over plus it slides nicely under the axle

i raised the bed hooked they strap to the top of the bed to pull the load onto the backs they were smoking and everything i seen a tm about running a cable between the rear duals and using a bar to hold the cable to the wheels so you can use em as a winch that put a good deal of pull on it but...

what tires are on there they look like xzl"s or or are they et drag radials glad i got xl's they seam to clean themselves better.also how much pressure did you have in em airing down to 15 to 20psi gives you a bigger contact area and they clean better when aired down.i agree get the winch i got...

. i scaled mine on a cerified scale 14,510 with the dump kit and hitch.most scrap yards dont care if scale is accurate they are only looking for the difference between the in weight and the out weight since thats what they're paying for .

i want to put power steering on my truck . looking to go hydro, a guy i know has air o matic on his truck he was braggin how easy it was to turn :?:i got in turned the wheel it felt like the tires were at 70 psi no power steering .1800 for a kit is a waist of money :cry:a strong wind hitting...

what you doing with the frame from the m105 i could use one for a camper projecti'm putting together

oh and as far as what grease to use .use wheel bearing grease or marine grease if you drive in alot of water it repels the water better and has the same characteristic as wheel bearing grease .also do you have duals or singles with the hubs flipped cuz your brakes may be dragging for some reason...

swap the hubs side to side if the other side gets hot you need a hub if the same side gets hot you need a housing the seal could be to tight which will fry the seal make sure you grease the seal to if you run it dry it will fry it to also make sure bearing are seated fully i tighten the bearings...

i have the new style wesy coast mirrors on my truck i'm thinking about trading them out for the old style that have the arm coming from the windshield mount and a brace going to the door hinge .does anyone have them on thier trucki was wondering how visability is with them and do they shake alot...

what did the motor come from was it from a deuce or from the tractor.i'm wondering if the rods and lube system are the same or heavier duty seems like that the weak link other than the melt down problem i turned my fuel up on my ldt 465 i'm getting just under 30psi of boost but only run it up to...

ouch just ouch.i bet the driver is saying tanks alot for savin his life.not sure about the overloading bad driver yes .did they think it was a f.o.r.d a.k.a flip over read dirrections:-D:-D

super nice job .looks like a new truck those remote spot lights are great i got one on my rv it does spot or flood . i think it's gonna find it's way onto my deuce pretty soon just need to make a battery bow for my 12 volt battery i'm gonna put under the hood .what other upgrade are you going to do

i did . i have an m35a2c with a twin cylinder dump set up on it. ive had it stacked over the roof with sand di about forty loads like that digging a mud bog pit . tore out a driveway hauled three loads of concrete over the roof buy about a foot real heavy my hitch was about two inches off the...

no way to fix em just change em out.6tls dont hold up very good if theyre not being drivin regularly .so if you only drive it once in a while get some commercial batts you'll be alot happier

wow how wide is that now:?:it has to be like 11ft wide now gonna need a wide load sign and an escort car to take it out the driveway looks huge.what are you planning on doing with it when you'rer done?

great mounting job .it braces the frame the way its mounted rather than creating stress points. although i do see some atvantages with smash rivets cuz they expand in the hole and stop things from walking in the hole we use to use them to assemble the frames when i worked at monon trailer build...