Search results

the company that has the contract for these is: ENGINEERED ELECTRIC COMPANY 141 NORTH AVE BRIDGEPORT, CT 06606 Here are the TM #'s from www.militaryinfo.com TM 5-6115-458-24P Generator Set, Diesel Engine Driven, Tactical Skid Mtd., 200 Kw, 3 Phase, 4 Wire, 120/208 and 240/416. DOD Model...

I may have the connections for the 240v and 208v mixed up, its been a while.

as I am aware, isnt the only difference between pulling 208v or 240v which two of the three legs you grab off of, you have two legs that are 180degrees out of phase with each other and a neutral leg. if you go from one hot leg to the other hot leg you get 240v, if you go from a hot leg to the...

the turbo is a bolt-on, to gain some power with it you will need to turn up the fuel a little in the injector pump. I RECCOMEND GETTING A PYROMETER BEFORE ATTEMPTING TO TURN UP YOUR FUEL!!!!!!

RE: plug if you are not going to use it, the plug and harness can be removed from the truck without harm. one of the features of the ICE kit is that it can read the engine rpm, I have not been able to figure out which pins is uses or the voltages that are used, but in theory we could just plug...

correct website is www.greatlakesmvpa.org

I would be willing to grab them and bring them to aberdeen. If you are near our convoy route.

RE: cucv build-up I'll post pics of my BDS kit once its one the truck.

Re: RE: Alternator size? the wesite is www.coloradok5.com you can get a little genset that will take up hardly any space at all. the new little honda's are very nice, if you only need to run lights and a sump pump a 2-3Kw unit would more that suffice.

you would be better off getting a small generator, like the 5KW gensets.

count me out, for now

count me out, for now

that's great. hope to be able to do that with my buddies son some day soon, he'll be 10yo this year

should be the standard bolt size, I think. I dont think that the 24v starters use a different nose, so they should be using the same bolts as the civilian 6.2's

RE: Meeting point it doesnt matter to me where we stop at, and we still have around 70days to decide.

wrong forum Jeeze Mike, your slipping

If you want to hook up with me, you could meet me down in detroit, I'll be more than happy to.

and you will also probably want to replace the front springs, bet they have sagged quite a bit, mine had sagged around 2"!!!

RE: compushift... sweet, and take care lifting that thing into place, might want to use a seperate jack on the tcase besides a trans jack. String a chain under it loop it around the frame; that way if it falls , you wont be hurt.

std. gearing in the m1009's is 3.08:1 if the fill plug is stripped in the sxle cover, you could take the cover off and drill through the plug and try an easy out (bolt extractor), should come right out. If not you should be able to get a new cover fairly cheap if you just want another stock...