Search results

Junior or Senior prom?

All the above is good, assuming your relay is still stock. Grounding the blue wire with a different relay may result in GPs constantly on. You need to identify what you have, or start over.

Click settings(top right) my account, paid subscriptions. (lower left)

01-07-2012 to 01-07-2013

If you use photoshop, you can fix the problem. Take a picture of your garage, then enlarge it. Your truck should fit right in after that!

Was it hitting with no valvetrain assembled? Do you have the cam timed incorrectly, and have a valve hitting a piston? Can you pull(loosen) all the pushrods and try cranking it over?

Hope you all have a great weekend.

Found this on Mico's site. The brake lock does not incorporate a pressure limiting function. Therefore, the operator should avoid excessive brake pedal force when applying the brake lock. Excessive force causes high pressure to be locked in the brakes which can be difficult to release...

I've never had that issue.

Fire extinguisher.

Do you know what it is for?

Thanks for the reply. I was just trying to understand how to help as effectively as possible. I thrive on the search, and do enjoy sharing how to do it.

Item 8, bolt (qty 8)), they all go to the same size bolt.

Pitts, notice what forum this is in.

A site search for CH49, brings up 4 results.

http://www.parttarget.com/2920-01-040-0308_2920010400308_CH49.html http://www.amazon.com/Champion-CH49-Cummins-Diesel-Engines/sim/B0060RLGAK/2

Look close at your starter support. Check if it is tight. The throttle cable can vibrate, check the bolts on that bracket. And the air filter housing , as Recovry said.

I don't understand why you could not find(after reading post 2 & 5) the bolt part numbers/info to acquire the correct hardware. A look at the -20P(parts TM with exploded views and part numbers). Then google the part numbers(boxed in red outline) under the heading "part number". Can you...

Simply googling the part numbers listed in the -20P, will get you the info you need.

This could have cost you a full set of GPs($80). If you drive a cucv, you should keep a DMM in the truck.