Search results

RE: Another thing you can do with A/W crane mounted on a m81 my pushbar is 107" ,made out of 1 1/4 pipe, i store it on the spare tire side of the boom in 2 holders that i made out of 1 1/2 id pipe, as i said it is not the exact length needed but close

RE: Another thing you can do with A/W crane mounted on a m81 you can go around and around with the STOP PLATE REMOVED

RE: Another thing you can do with A/W crane mounted on a m81 yes, thats how you do it, to retract ,pull the pins, then use the block to pull the end extension in, the tm-10 (iknow that you have that) calls for a 3 peice setup, i made a 1 piecer , lighter and easier, ill go out and measure, i am...

RE: Another thing you can do with A/W crane mounted on a m81 the 246 and the 819 donot have the throttle compensater that the 543,816 have, you have to set rpm, no clearance issures if you TAKE OFF the stop plate, are you useing the pushbar to extend the end section, pm me you phone number ...

RE: Another thing you can do with A/W crane mounted on a m81 yep,the pics dont lie, but not on a 816 or a 543

RE: Another thing you can do with A/W crane mounted on a m81 not the stops but the piece that bolts on the turntable in front of the boom pedestal

RE: duece going south from 90, comming into houma on 182 there is a m37, compleat but with a bunch of rust, it is on the left in the back heading towards houma, it is at charles truck parts (i think thats the name ),he said it ran when it was parked, how long ago is another story, the next...

RE: duece where in south la. are you that for sure is a m-series cab, so cant be a 45 and 51 was when the first m-series were first shown, the ins. card could be wrong, standard could be the maker of the bed the that was added after the truck left military service, or for that matter a...

RE: Another thing you can do with A/W crane mounted on a m81 no, need a driveline and the lower mounts( i have a extra set of the upper main mounts that i am going to make into a set of lowers), next time im home ,i hope to take it down to the driveline shop and have them make me up one

this is how us A/W owners (m108, m60, m62, m246, m819) set our front winches, the last two is the winch in place waiting for the bolts

hitch wrecker, how about something like this, the mount has extra holes so the pentle can be raised, the pentle is a combo rated at about 10000 lbs., i have pulled many a heavy air compresser, trailers, ect. with it over the years, i just move it from truck to truck (it was last on my f350)

how did this end up in the chaplains conner :?:

dont turn around on your mother in laws lawn with a 819 eather, that happened over two years ago and i still here about hard it is to mow because of the ruts

is there a web site for tank owners

how about pics of the yard and the 4 on the way

more then likely a m813, what size tires are on it

that would be a early 809 series, what kind of truck, ie. tractor, cargo, ect.

i have them in the gurge

let me tell you sex is a lot eaiser to get then NEW , not nos 1200x20 ndts, if everybody waited as long fo sex as i waited for these tires, the birth rate would be WAY down

my 819 (36k lb) get almost 6 mpg on the road, about 4 mpg around town ( a lot of third gear), it has 1200x20s. on the road , it is mostly fifth at 1900 to 2000 rpm doing 60 mph or a bit better, but not on long steap grades