Search results

Well… bugger! IP is bad. Don’t know if woodruff key sheared or shaft broke. Engine was turning over and periodically slowed down. Then there was a metallic ping and the starter engine speed sped up. I spoke to Steve/RWH, and he gave me some amazing information which I used to see that the...

After uncounted delays, Hummer H1 finally lost a bet with his girlfriend because I showed up in California ready to work! New power steering hose installed. New batteries installed and wires and such cleaned and dielectric greased. New regulator installed. New fuel filter installed. Genius...

I’ve seen some use 5 and 10 lb persuaders to strike the deflated sidewalls of our tires to free them up from the rims before pulling apart.

He is displaying a spirit of 1776 flag. It is beautiful. No one here compares European flags to Hawaiian shirts.

RWH sells the flexible lines IIRC. Ask me how I know.

If you have to ask, that is very concerning. Stainless steel requires a single flare. Other materials require a double flare. I’m with Mogman on this

BLK is an awesome member. He has also made it clear that he removed his Slantback ages ago. I have no doubt that either something is out of alignment OR something is bent. You need an assistant. You need heavy magnetic handles to lift the hatch up and out. You need to measure and realign...

Do I really need to do it? nopics

Always double check with an accurate multimeter

Coug is absolutely correct (as always). There is also a paint and restoration section on SteelSoldiers. It has members who might have done similar stuff

Have you verified they are properly functional?

Don’t push the Red button. Start with fluid level and replacing tranny filter.

SATELLITE TELEPHONE! Or iPhone 14/15 for emergency satellite call for help. Filter straw to drink unpurified water. A set of clean dry clothes and jacket in a 5 gallon ziplock bag. 10 gallons of water. Terlet paper in a ziplock. Air horn and bright light source.

When I received my M1025 the tires were like Steve Buscemi’s teeth. An alignment later and she was queen of the road.

Hummer H1 makes these trips all the time. Ask him when he gets back

Any boat shoppe can fix this. They also sell the stuff to clean the plastic windows to get rid of the cloudiness.

I couldn’t have said it better Dred… If you lived in Alaska, maybe hard doors or insulated doors. If you lived in Chicago, hard doors to help against theft.

Why not try UBINTU Linux?

Clean the stack. Clean the inside of the radiator. Replace the hoses and ensure none of them were collapsing under vacuum effect. Use a laser thermometer and stop wasting time assuming the gauges are buggered

https://www.steelsoldiers.com/threads/how-to-bypass-pcb-i-am-aware-some-hmmwv-owners-have-done-it.182560/ Seems like the perfect time