Search results

I have a mep-831a that was a reset unit and I have done a lot of work on it to get it running. Eventually, it ran fine. I ran it at 3kw for about 4 hours and it ran did ok. All of a sudden now it shuts off instantly with a high temp alarm. What is odd is that before you start the unit the high...

Its time to change my trans oil and filters in my 925a2. It has been running fine for the past 10 years. It came with motor oil. I'm not sure if its 10w or 15w-40 but I think I'm going to put 10w in it. I am not a big fan of the oil to oil cooler for the trans. I dont think they cool very well...

Parts sticky, google doc and misc posts list 2 different belt numbers for the 8.3L K080675 and K080680. I think last part of that is the length. What one is correct? Thank you

I'm looking at picking up a couple trailers at the GL. Some cargo some with 10kw gens. Details say that there is no forklift available. I have a 24' car trailer with ramps that should be plenty wide for any trailers I get. I also have a large assortment of chain hoists, chains, and straps to...

Are the front wheels/tires of a 939a2 supposed to be perfectly vertical? I have noticed on mine that the tops of both front tires are leaning out. I'm not sure if this is normal, an effect of the driveway being crushed under the weight of the truck or a sign of something failing. Thanks.

The last time I ran my mep-004a last summer it ran fine. This spring I converted it to single phase following the instructions in sewerzuk's thread. I gave it a test run today. Starts up fine and volts/hertz come up right away. As soon as you let go of the run/start switch though the...

I started the truck a dozen times today. It always fires up instantly. The last thing I did was change the fuel filter. I primed it for some time with the primer on the lift pump and the truck will not start. Does not catch either. I cranked it for some time too. I took the new filter off and it...

I ran in to a problem today that I really need to get fixed before next weekend. I have not had the truck long but the few times I have driven it I have had no problems other then it has very little power. I went to use it today and it will not shift out of neutral. The release on the shifter...

I have been slowly working on bringing my 925a2 to a drivable condition. I have a solid ABS light. I have checked the 3amp fuse. I have not checked the 15amp one yet. By the time I located where it was right up against the fire wall it was to dark to check it. What I did find was that 2 of the 4...

I just picked up a -004a. I'm getting a little crossed eyed from hours of searching. I can not seem to find the part numbers for the 2 fuel filters or the oil filter. I also see that some people found some spin on fuel filters? The part numbers for belts would be nice too. I'm just trying to get...