• Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!

  • Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.

 

Search results

  1. BA232

    I Need a Voltmeter Gauge for a CUCV M1009 1985

    Look like a 5w part # 660-MOS5C301J
  2. BA232

    Choctaw H140 issue

    Hello all, I’ve got a H-140 heater that when set to heat quickly(less than a minute) rises past the 130 degree thermostat and shuts down the burner until it cools down to around 100 and cycles again doing the same thing. Removed the ducts and jumpered out the 130 thermostat and the unit climbed...
  3. BA232

    Cruises near Stow, Ohio

    I may go.....
  4. BA232

    solargizer location?

    Here in snow country, I found this works well. Keeps is clear of snow.
  5. BA232

    strange "bump" when decelerating quickly

    I have the same thing on my m1008, kind of a dull thud and only at higher speeds. I was thinking it was something in the drive line, I'll be checking my motor/trans mounts.
  6. BA232

    I Need a Voltmeter Gauge for a CUCV M1009 1985

    Looks like you would be good to go with a new resistor. Worked for me.
  7. BA232

    Headlight switch: What the. . . ?

    That's funny, I'm of an age to know how that one works. I see it on the other end when teaching people the use of modern technology.
  8. BA232

    Got me a brand new CUCV tonight with ZERO miles!!

    Keep it going!
  9. BA232

    NOS USMC M1028 from Norway Storage

    L u c k y !
  10. BA232

    lack of motivation

    I've been there with projects. I'm half way through one now and I've learned to take it a little bit at a time and enjoy it. I was in the driveway today in 20 degree sunshine replacing my noisy power steering pump on the m1008. Turned out to be a loose bolt under the pully but I got the new...
  11. BA232

    m1008 Installed hitch

    I want to find a cap for the winter to keep the snow out. I'll put tem back in the spring. Real east to remove.
  12. BA232

    m1008 Installed hitch

    No plans for the front hitch yet......
  13. BA232

    m1008 Installed hitch

    It's running great. Added a block heater, Solar battery maintainer and fixed the Batt gauge with the 300 ohm resistor trick I found here.
  14. BA232

    m1008 Installed hitch

    I have to admit it's not my metal brake. I just have friends with a metal brake.
  15. BA232

    m1008 Installed hitch

    Installed a hitch over the weekend and this is how I did it. The hitch was free/used and was wider than the frame of the truck. Only mod to the truck was I needed to hog out the mounting holes on the bumper bracket to make up for the plate and add longer bolts. Spare tire still fits. I got lots...
  16. BA232

    I Need a Voltmeter Gauge for a CUCV M1009 1985

    Checked my resistor last night and it bad. Shorted the two posts and the needle started moving up so I ordered my resistor. Thanks for the great info!
  17. BA232

    New owner of a M1008

    Drove home my new M1008 tonight and I'm sure you know how good that feels to get a new MV. After a year of searching all over the country, found one 8 miles from home and from a SS member. Couldn't be happier with the truck and was nice to meet a fellow SS. Hope to have a collection like you...
  18. BA232

    Interest in North East Ohio Winter Convoy

    Don't have one to drive but would provide support.
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website like our supporting vendors. Their ads help keep Steel Soldiers going. Please consider disabling your ad blockers for the site. Thanks!

I've Disabled AdBlock
No Thanks