Search results

Kansas Arkansas Missouri Oklahoma Steel Soldiers Rally OCT 3-5 @ D-Day Adventure park is 6 weeks till the KAMO Rally and we Need # of folks attending so we can plan for Saturday night Dinner Oct 3-4-5. Even if you don't drive your MV come by and spend time with others who share this...

Had a Great time I will try and post some pictures.

I will be there Friday Afternoon

I have 1 dummey round and a bunch of empty cases

I had a model in 1/72 scale i just scaled it up, and viewed a lot of photos.

If you have any ? post and I will try and answer them Thanks

Finishing up, primer, paint

Building the barrel (PVC)

#1 Elevating gears installed #2 rear view #3 working on bed #4 elevating assy done #5 mounted back on carraige #6 elevating gears with temp wheels

Shots of starting work on the elevation gear

#1 lunett installed #2 gun carriage #3 #4 #5 # 6 traversing linkage Note I worked and re worked the traversing gear several times till i finally got it to work correctly used the jack off the back of the trailer

#1 start of lunett #2 lunett with start of spades #3 spades #4 trails pulled and linement pin and latch #5 start og gun carriage

#1 start of trails 4x6x10 #2 trailes attached mwestmules & oldshep in back ground #3 trail attached to axle with #3 from above #4 starting on parking brake #5 brake attached to trail

Photo 1 trailer after bed removed # 2 same #3 start of pivot pins for carrage $ closer detail

I have a lot of picts I will tryand post them, as for instuctions I am not very good at writing things down. I see things in my head then re work it several times till I put it togather.

Great project I have a 52 M38A1 and it is a Great Vehicel to have Best of luck on your project.

I started out in the Oil Fields of Oklahoma welding with a stick welder. A good welder can weld just as good with a stick as a mig. With that being said I have a 110 volt Lincoln mig and found that it worked but was very slow and had do make several passes. I have since bought a Hobart 210...