Search results

Good luck with your build. If i have time i will post some pics. As for your flywheel deal not sure what to tell you. My bell housing is the same thickness as the 350 cummins bellhousing we pulled the flywheel out of. Sounds like u have done your reserch like i said good luck

Good luck with your build. If i have time i will post some pics. As for your flywheel deal not sure what to tell you. My bell housing is the same thickness as the 350 cummins bellhousing we pulled the flywheel out of. Sounds like u have done your reserch like i said good luck

Mine has a 250 cummins and we did use the original bellhousing. There was a spacer on the end of the crank that had to be removed and a spacer put on the starter to shim out correctly. Yes im refering to the drive shaft between the transmission and transfer case. We had a drive shaft out of an...

I just stumbled on to this thread. I have a m929a1 that we use daily in our excavtion buisness. We swapt trans last year to a 9-5 13 speed. It was time consuming project but results were well worth it. I can tell u a few problems we had. Transfercase lever and linkage were in the way and had to...

Not to rob your thread but for those guys who are looking for a bobber i have mine in the classifieds Lds, Dump, 395 Michelines

the lds has different pistons, injectors, injection pump, and as you mentioned turbo. Every one on here says the ldt 465 does not have piston coolers. I can tell you mine did, and the parts book i have from memphis equipment says they all do. As for is the swap worth it, i would say Yes its...

You need to bleed the brakes there is a bleeder on the air pack

Thanks Alot that helps!!!

Does anyone have an exploded view of a m35a2 master cylinder? Im rebuilding mine got it all back together the way it came apart and it wont work. Just want to make sure i put it back together right.

I know this should be in the classified adds and it is, but i figured since the m764 is so rare some of you would be interested. mods do what you want. So i went to my local junk yard today, one i have been to a hundred times or more and i noticed they were crushing some junk in the old...

I need help identifing A wiring harness. I bought the harness acouple years ago from a member on here for a 5 ton truck i was re-doing but it din't work out. The more i look at it the more it looks to fit a M35a2 but im not sure because the NSN numbers dont match. Ive searched all over and...

UH oh sounds like another progect to add to the list:lol: The diesle looks just like the Izzue diesle that was in my buddys scout plow truck air cleaner and all. i like how the add says 6 cyl. GAS.

She's a diesel and is that power steering or am i lost?

There are three main wires coming out of the head unit aka "Stereo" Red, black, and yellow then u have your speaker wires. The Yellow wire is your main power wire that should be hooked Directly to the Battery with in inline fuse. The red wire is your key on power, that should be hooked into...

The first pic. is it , thats from 2 weeks ago it doesnt look that bad but the snow on the one side is all thats keeping it up right. sorry dint mean to hi jack the tread.. heres a couple more. the oshkosh truck is the same model as the first truck in this post, its an ex Air Force truck Marquete...

here are some from work.

I dont know of anyone who sells them, but it wouldnt be hard to make one you can buy the military trailer connector end pretty much anyware online and the civilian end at in parts store. just figure out which prong is which and wire them together.

what size tube and flap are you running on the stock rim??

what day(s) are you takin the trucks up? im interested in going.

RE: Re: RE: Oil line?? I will keep that in mind