Search results

Have just received a kraz 255b to toy with and play around with while deployed and need some help with it. Mainly need a manual for it that is in English I have found one in Russian but does me no good. Have tried most other sights and no one has them converted any help would be great. Trying...

Truck has been working fine then went to start it and burned up this link. Replaced it and checked all my connections and glow plug card all looked good. Went to start and did same thing replaced the gp relay, did dog head mod, and also replaced the gen 2 relay now truck has now power in cab...

Anyone know what kind of lights the m1031 trucks use for beacon lights. Have two of them on myntruckmonly one works switched out bulbs and checked grounds still no deal. Looks like I need another light and possibly a bulb source any info would be awesome.

So I just picked up my 1986 cucv it is a 1031 model jump started it and drove off the lot onto a wrecker. Well that was about the extent of my good luck so to say. Started messing with it going to change oil, transmission, axles, and transfer case fluid this weekend. Already did fuel filter...

Drove the deuce to work this morning all good no problems let it idle for 5-7 minutes and shut her down. Well when i went to start her up this afternoon she just didnt sound right like it had a rattle in it,wasnt that bad so away i went. I immediatly noticed that it was just pouring out the...

Just got a set of electronic wipers off of a m35a3 and was wondering if anyone else has done this. Ive searched the threads and found a few people that did a electronic conversion but want to know who has done the a3 conversion. Was out looking at it earlier and seems like the wiper arm on...

In the middle of turning my m1008 into a dually and im looking over my options for tire coverage. Ive tried to find a set of dually fenders to no avail so im thinking of puttig on a 8ft service body. Though about building a flatbed but can get the body for same price and gives locking...

So got my alternator rebuilt and put it on the truck no gen lights. Ripped apart whole dash cleaned and replaced everything all good. Still not charging battery followed wires and replaced the gp relay and it worked everything charging and ready to go. Flash forward a week and now nothing not...

Ok so i have been searching all over and still have no luck. My rear taillights are not coming on at all on my 66 m35a2. I have brake lights and turn signals but not running lights. Have new wiring harness front and rear new 3way switch and new turn signal switch. Still no running lights...

Have a question about the starter on my m1008. Ive had it rebuilt and it works great upon initial startup but when you shut it off when warm it hesitates to start. The starter turns over but very slowly both batteries show 12+ volts any ideas. Im thinking that it might be getting to hot from...

Soo im having a little bit f a problem trying to tack down the harness for my preheater. I found a site that has it but they only do buk sales and at least $500 minimum so does anyone know where i can find one. nsn 6150-00-119-3919 fsn 2990001193919 This is the harness that connects the...

Just installed a new front wiring harness on my deuce i ordered from odiron nsn NSN 2590-01-016-3187. Issue im having is according to the tm 9-2320-209-20-2-2 wire # 33 and 55 go to the temp sending unit and the pre heater. Cant find on my m35 where they plug into on top of...

Hello have a question looked through the search couldnt find anything so here i go. I noticed the rear bearing retainer on my 66 kaiser m35a2 was cracked more like on of the ears is completly broke off. Anyways took off the jack shaft and all other pieces in the way but now cant get the yoke...

Just got done bleeding the brakes on my deuce after installing a new master cylinder. And here is what i found while crawling around under neath the transmission cap reatainer for the rear bearing is cracked. I found it in the tm as part #7748571 but couldnt find an nsn. Was wondering if...

put a new starter in my truck now every now and then its like its not engaging alll the way. Will spin but not catch the flywheel what could be the cause of this. If i continue to use this way will it damage anything, saw on here somewhere said it is a realy. Where is it located and what part...

hello everyone i know im going to hear about searching the site for my answers i have an to no avail am still stumped the 9month old screaming at me isnt helping. Im finally going to go pick up my deuce on friday after waiting since december and have a few questions 1. it supposedly has a...

im still waitin for my ecu 2 clear but figured id try to get a head start and as some questions first. won the deuce out of duck,nc they say it has a cracked head when parked two yrs ago in runnin condition was wondering a few things. wha should i initially loo for as far as problems other than...

this is the second vehicle ive towed from this spot first one was a caddy no pics on that one though didnt even give it any go go juice just put it in gear