Search results

Sub-2500 rpm at the transfer case is safe limit to reduce overheating - Tanner

A GM 6.2 or 6.5 with a Deuce 3053A Spicer trans - Tanner

Try Charles Talbert at M-Series Rebuild -

...the S10 fuel tank swap is still a really cheap & easy way to go. LMC offers new S10 Blazer 20 gallon tank for $99.95 + shipping - http://www.fourwheeler.com/project-vehicles/131-1104-1965-dodge-m37-the-dumpster/photo-17.html The swap...

I commented on same post in 2010... Squatch hasn't posted any results since that I have searched for. This type of mileage would be shouted from the rooftops if more than one person achieved same results. I'd question speedo accuracy in relation to posted MPG results after Final drive regearing...

The Bosch CIS/'K-Jet' mechanical injection won't work on the 230 due to Siamese'd intake ports on Dodge manifold - You'd need 1 injector per cylinder. Likewise, the EFI system from a Jeep 4.0 straight-6 engine won't adapt, as it also is a 6-port/6 injector setup. And a 'tuned Weber' will never...

So - from reading this, it would appear that it's better to not mention sales, auctions, or anything at all pertaining to the transaction of greenbacks for tangible physical property. 'Tanner'

... so, buy a civvy Hummer H1 & some camo paint. There! I fixed it - ;-) 'Tanner'

So - you performed the swap without resorting to narrowing the axles/housings?

Here's another builder's Dana install - g741.org • View topic - Rebuild progress (5/26/09 PG. 7) Or info from another installer... http://leathernaturally.com/m37project.htm - - Is this second truck article by chance nattieleather's project truck that is running '79 Dodge W200 axles? 'Tanner'

Cos: The rims in picture of M37 are too narrow for the engineered design of the tires being used. Sure, you can make the tire squeeze onto the rim & have the sidewalls pulled in, but you end up crowning the tire & wearing out the center of the tread when aired up to proper use for highway...

1-Piece windshield Contact DAP here on the SS forum - he has a '37 with a 1-piece windshield. His was locally made, as I recall from speaking with him & seeing his truck. Glass shop up near Charlotte, NC area(?) cut his glass for him. I believe that his frame was a modified M37 stock...

The Greek harness is 'correct' for the M37's used in Grecian armed forces... 'Tanner'

OP - there are a number of non-Gov Liquidation sources available for rims & treads... Search can be your friend. Welcome on SS - 'Tanner'

Brent Mullins didn't have any decent Greek harnesses left when I last checked 3 months ago. 'Tanner'

I see that you still haven't simply bought a CUCV, or mounted the M37 cab/bed on a CUCV frame? :) Where are you measuring to get track width? From drum mounting face to drum mounting face? Ahem.... http://www.g741.org/PHPBB/viewtopic.php?f=5&t=4924 - wheels are too narrow for the tires, but...

The HOA is most likely using the definition of 'truck' as based on MD DMV or city/town ordnance interpretations. My wager is that the 29 October hearing will result in something that the OP won't be interested in hearing. 'Tanner'

The 318 was a runner, correct? Why tear it down? 'Tanner'

..............

Folks - you miss the point to the HOA determination of what constitutes a 'truck' - the rules/regulations within the HOA agreement are written vague SPECIFICALLY so that the HOA head membership can determine what stays & what goes. Most ALL regulations like this are vaguely written by sleazy...