Search results

Got it the check valve was stuck closed thanks for the help

I did find both of them it did not work thought there may be a better way thanks

I parked my truck back in late fall ran fine, it was kind of low on fuel and had summer fuel no anti gell Well couple of days ago I went to start it started right up ran about 3-5 minutes and shut off. I don't know if it gelled or ran out of fuel It has been real cold past couple weeks I went...

Mine is a real bear to try and steer when you are moving slow. That's why I think somthing is wrong. I can hardly make a turn at an intersection without going over the lines .

Only when turning the wheel

Thanks Runk, it never did this before though. It just started setting the buzzer off That is why I am a little concerned Thanks Kevin

It is not the cylinder on the back of axle.I Had that apart and cleaned and the reinstalled it. It does it in both directions so that should take out the possibilities of a hose???

The only time the air gauge goes down fast or the buzzer goes off is when I turn the wheel and hold it there. You can see the gauge drop. This only seams to do it when the truck is at idle or low rpms like when you are parking

Sorry fogot to put ,I have an m35a3 I have a problem with the low air buzzer going off when turning the wheel. (before somebody jumps in and says use the search I did ) I went and put marvels mystery oil in the air intake on the steering box and also in the air assist cylinder behind the axle I...

I hauled my m35a3 about 200miles on a 25 foot deck over and a f-650 dump it probably weighted about 32000 Unless you are a gabling man I would not even thick about it with a 250 series truck It will pull it just fine but if you have to stop quick or if it gets swaying your gonna be in a world of...

I ran home heating oil in my caterpillar dozers for years better than the new low sulfur Now I run off road witch is almost the same as home heating oil only thing it has less sulfur as required by law So basically they charge you more to take the sulfur out and you have to pay for an additive...

I bought the one bearing off amazon one race off ebay and the other bearing off of a different ebay auction I was in no hurry and it was cheaper that way . The inner is complete race and bearing together where the outer is separate I would stay away from locatebearings They where very slow and...

I just went thought the same thing although I didn't need a hub VERY EXPENSIVE

I am still looking I checked all over and found a few but very expensive any help guys Thanks Kevin

Please don't say use the search I did and did not find anything I need to replace the front drivers side wheel bearing on my a3 . I was out for a ride today and heard a squeaking sound with turned into a grinding sound and then started to smoke out of the front wheel I did get to baby it home ...

I have a m35a3 and need two new batteries What is the best group size to use other than the 6tmls Thanks Kevin I have no problem making a adapter for the battery box Thanks Kevin

Well just wanted to post a follow up. I went yesterday and rechecked everything and it turned out to be a bad battery when under load. I tried putting the charger on but didn't crank fast enough so I put in two batteries out of my one dozers and it started right up. So know my next question what...

It is an automatic Wish it was that easy. I did clean the relay contacts before putting it back together. Will a battery drop do that quick and come back as soon as load is taken away? I alway thought once it dropped it wouln't come back that fast .Well I guess i will have to wait till monday to...

Also even if the voltage is real low shouldn't it atlest try to crank? Sorry for all the dump questions but this just has me thinking Thanks

Ok I did not get to check the voltage at the batteries while the starter was hit. I do know that when I hit the starter switch that all the gauges drop. I was just assuming that the switch was only putting out 9-11 volts Maybe the batteries where just dropping It will be a day or two till I can...