Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!
Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.
The comvec show is moving to a new location for 2013
at the four town fair grounds somers CT June 8th
This will be much closer for the sourthern Mass folks
flyer attached
Sunday the first for a good cause don't know how many MV's but one of the organizers asked if I would bring the truck.
He said they have choppers flying in and some old cars so if your in the area
stop by.
After searching the post's I went with napa#76787 glad I did the old shocks were shot and one lower stud was bent to the point of cracking.
The pair went on fast no problems I had to jack the frame about 1/4 inch to fit them in. The bushings were a little high but cutting off the raised...
OK I give I read the TM and the threads I found here is there any trick to getting the boot and clamp on the knuckle?? short of three guys and six hands I dont see it the TM says one man job what I am I missingaua
had a good day here in the northeast so figured I get my seal done leaking bad soaking the breaks so I alotted six hours read the TM's and members post's got started had a friend help with the tire and drum everything was going great. Then the seal retainer!!!! had my big slide hammer with me...
after many months of looking all over the northeast found one 25 miles from my house. 1972 AMG M35A2 wo/w with white LDT-465-1D dated1987.
needs some TLC. Tried to attach pics lets see if this works
waiting to inspect what I am told is a 1971 K/jeep M35A2 with a multi fuel engine and a four speed? My research has shown that they were all five speeds.
Any input is welcome hope to see it in person Sat.
Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website like our supporting vendors. Their ads help keep Steel Soldiers going. Please consider disabling your ad blockers for the site. Thanks!