Search results

Does anybody know the actual weight of a M923a2 ?

Ive mounted at least 50 14-1600's and never had a problem seating the beads. Today one of my 1600's went flat and popped off the bead. That tire broke my @#% it just wouldnt seat. I try not to use starting fluid, so today i used a 21 inch motorcycle tube. I put the tube between the rim and...

Does anybody know of a salvage yard that has parts for the m915-16-20 ?

I finally found a nice M916. I want to use it to pull a dump trailer and a lowboy. The 5th wheel height was too high, so i got a 2.5 " kingpin 7" overall height sliding setup. I removed the roller and made some ramps. The hydraulics on the truck will run my trailers so I had a wetline valve...

I just bought my first M916... With a cat 7155 trans. Nice truck. I'm going to use it under a lowboy and a dump trailer. But first i have to work out some bugs. The wires from the jake brake pedal run into the 7155 trans. Can I bypass that (wire it like a civvy manual trans truck) or is it...

Theres a member that has a green/black camo m916 with a tank trailer on it in his avatar. Ive searched and searched. I cant find them, can sombody direct me ? thanks

Does anybody know where i can find the gear ratio's for the 7155 trans ? Thanks Ted

Does anybody know if the M916's that are being released from the government now have 5,6 or 7 speed allisons in them ? What is the top speed on these trucks with the different transmissions ? I also dont see any air ride cabs on them, Im guessing they didnt do that to many of these trucks.

Does anyone know where i can get the studs that hold the super single rim halves together. This rim is an older rim with the smaller diameter studs. I'd like as much info on the 2 stud sizes as possible. I took a bunch of these rims apart and found what looks to be at least 3 different o...

I understand the fuel gauges in these trucks are a problem. Has anyone found a way to treat or clean the sender so it actually gives a decent reading. Does anybody have an opinion if this is a crud problem( some GM cars need an additive to keep the senders working ) or a bad rheostat on the...

I just got my M929 home. It was run out of fuel. I bled the fuel system and it started right up and ran perfect. It was refurbed 3/10 and never used. All the lubes were full and crystal clean. The only glitch is a leaky heater core. Ive said it before, i hope i can say it again "its nice to...

I just won a m929 dump at New Castle,DE 11001/5189 towed on to lot can anybody give me a heads-up what might be wrong with this truck before i ride down with a low boy trailer any help would be appreciated thanks ted

I finally got done swapping bodies ,mounting the plow and wiring everything. Came out good. Im pretty sure I jinxed the snow for this year.

3 out of 5 m939 trucks i bought have the air lines to the t-case routed to the wrong place. 2 out of the 3 were that way right from the military. 2 of them had the air lines fom the low range shifter linkage valve( the valve that engages awd when you engage low range) going to the t-case...

The engine fans on my m939 trucks seem to be erratic. Sometimes they come on and go off pretty quickly. Other times they stay on for a long time, even with the temp below where it should shut off. On one truck if the fan comes on it wont go off untill i turn the truck off and leave it sit for a...

Heres some pics of my m932a2 with a 11 ft cargo bed. Its just about the same lenth as my m35a3. Ive got a 24v hoist on the way. We didnt cut out the middle of the bed , we cut the end off and rewelded it. Ive been wanting to do this for years. Ive got 16.00's for it but i think it looks ok...

My M932a2 was doing funny things. The air compressor was cycling ,the safety blow off valve on top of the air dryer was popping off with only 100-120lbs of air. I started at the dryer and was going through everything when i came across a check valve inbetween the dryer and the first air tank. It...

has anybody figured out how to turn up the 8.3 cummins pump ? not the afc adjustment. it doesnt have the plate on top like the non military models.

This is the truck i got from GL in VA. What a sweetheart,everything works. Everytime i get in this truck i smile just thinking i actually got something good back from the government.

:grin:After a bunch of fixin, it was time for a shakedown trip. Pulled ok for a little motor, no mixing of fluids (WHEW!!!!). Trans seems to shift ok. I need to address more issues. The air ride is nice. I was able to get the 5th wheel height lower by trimming the rods to the leveling valves.