Search results

thanks

Can someone please provide the trans spin on filter number for an M923

Thanks guys

I'm sure somewhere on here this has been covered but I couldn't find it in the search. When using the Baldwin OB-1368 spin on oil filter upgrade adapter whats the correct spin on oil filter number ? It's on a 85 M923 with the 855 Cummins

anyone know where to get the airlines that run from the brake chamber to the valve on an lmtv trailer? they have that oddball right angle fitting on them

What do you run on the rears?

now theres the intelligent answer we were looking for, I thank you sir

Not that I doubt your judgement, but a second opinion is always welcome

Can anyone identify the wheel in this picture and will it fit a 5 ton?

Anyone picked up in Barstow lately? Do they rush you out or can you put batteries in and check fluids? Is there anyplace right outside Barstow to work on minor repairs? Will they let you tow a truck out with a pickup? Any info would be helpful. I guess I'm asking are they cool or not? Also any...

Anyone know what size and type of cable is acceptable to secure an s280 shelter in the rear of a 5 ton? I have the correct cable eye hook set-up in the truck bed that was originally used.

Wheres the best spot to put the probe for a mechanical water temp gauge on an 855 cummins in a 923? Thx Doc

855 Cummins in an '85 923. Oil pressure gauge is at rest at zero with the engine off. Start the truck it pins high. Gauge or sender? Any part numbers or napa numbers on the gauge or sender? Where can you tap in for a mechanical gauge? The sender I believe is on the driver side correct? Thanks Doc

I did, he hasn't replied yet. Thanks

Has anyone bought a trailer lately (1101 or similar). The paperwork provided by GP is without a notary stamp and Arizona's refusing to process a change in ownership. Anyone in Arizona or anywhere else experienced this? Doc

52" 300watt 10-30volt LED bars on Amazon for under $70

I put a second fuel tank on my 923 in place of the large tool box. Fits very nice. I'm going to run a crossover line through 1" square tube to protect it and a ball valve on each tank. I pulled the drain plug out and low and behold it looks like 3/8" pipe thread but its not. It's a hair smaller...

Anybody installed a water treatment/filter on their 923 with an 855 ? There's a u-tube video with an install and the guy plumbed it in the with T's to the heater feed and return lines. Seems just tapping in somewhere else would be easier or just putting it inline in either the feed or return...

Anybody going to be in Kansas City before next Tuesday 9-29-15 can take a quick look at something for me?

Me too