Search results

There's a gasket most of the time between the trans and transfer case. If it is coming from there I would pull it to see if it is a gasket or a surface oring. Probably a gasket and if so put some gray RVT (first clean and try out the matting surfaces) and let the truck sit for a while (half a...

Was the timing of the IP messed with at all?

With the wider stance and not having the center of the tire close/if not over the center between the two bearing is just asking for trouble IMO.

Thanks for the explanation makes perfect sense.

So that would indicate the hubs aren't flip then, if the rims are dished out. Here is a side shot (Bad, probably means the hubs aren't flip?) http://hickory.craigslist.org/cto/4650141687.html (Dished in, indicating hubs have been flip and the most correct way to run singles?)

Gimp, if you are referring to my picture the owner said they flipped the hubs. How would the loops play in to it when a winch was added?

How is the compressor tied in to creating blow by? I've seen the mount the compressor mounts to and looks as if it is almost part of the block?

Fantastic! Love the history of these trucks.

Hey guys I've found this truck somewhat close to me and saw these loops. Just curious what they are for, owner said to hold a winch but that is not correct as those are mounted to the frame.

I was looking at different kits today on my lunch break. Funny story, my dad went to change the oil in his 13' jeep (my 12' that I had, had the same setup) anyway he sepnt 20 minutes looking for the oil filter until I show that it is a cartridge element on top of the engine. In a plastic...

Never get a new Wrangle then :) As far as the filter go, I look at them as a investment to protect my toy..LOL

Thanks, when I fine one this is the first thing I'm doing to it. Fuel included.

I'm looking for a m35a2 I'm in search for a m35a2 that I can wrench on and DD if I ever wanted to. I do not want someone's else project that does not run. I would like to find one that I could drive and not have to fix anything for a while. Must have: C turbo Little to no rust No leaks...

A few pages back (page 13) a member mention the pressure drop from oil pump-filters-oil gallery. Thus the talk about how these engines were more prone to failure due to not being worked vs their tractor counterparts. My question would be, this seems from the OEM filters not having...

Glad you made it home. I hope you didn't still have to pay on account of the wreckers stupidity.

Do not need a CDL since I'm not for hire. Getting a airbrake endorsement at the most, or class B regular license. It is not hard with my other job (with my father.) HX? Parts for any of the machines are big and heavy. I would not even think of getting one without having the means to...

CAT does no encourage it at all from what I'm told, but I'll have to do some more digging. The a3's are a little out of my price range it seems and for the $ I could get a 5 ton and it be more comfortable higher speed and etc. Personally I like the looks of the 5 tons and interior (can't...

Yes sir, I've been reading there as well. I do plan to filter down to 5 or 3 micron with three steps and run a mixture of at least 20% diesel or more. the idea is to cut fuel cost as much as possible with in reason, that reason is running no less than 20% diesel.

Kinda of a silly question but my search results did not yield that much. I looked at a A3 today and drove it. Mech seems fine other than 2 pinion seals need replacing and oil pan gasket. Any who the owner of the A3 said how the a2's engines are not reliable compare to CAT engines. I do believe...

Front axle would be. Axle housing---axle seal--axle---Boot (not sure if this is counted as one of the extra seals)---knuckle---spindle to inner bearing seal. Compare to the rear Rear axle housing ---axle --- inner seal--- hub---outter seal. There rear inner seal is design to keep the grease...