Search results

I HAVE A QUESTION AND CURIOUS ABOUT THE DB2 PUMPS. I HAVE A 84 CUCV AND LOOKS LIKE I'M GOING TO NEED AN INJECTION PUMP. SO I BEEN DOING SOME RESEARCH AND MINE HAS THE DB2 4267 IF I'M NOT MISTAKEN, CORRECT ME IF I'M WRONG. I'VE BEEN READIN I CAN PUT A DB2 4544 INTO IT AND IT'LL RESPOND BETTER...

Good evening gentlemen. From west Texas. I'm having a problem with my 1984 CUCV. I was driving down the highway and all of a sudden I started to get a bad vibration in the drivetrain, I check my motor mounts and they checked out good. I disconnected the torque converter, started it and still...

m1097 p/s issue. The initial problem is the power steering is hard, even harder when fan clutch switch is connected. P/S pump, hydrobooster, master cylinder, steering box are all new except oil cooler. all pressure and return lines are new except pressure line from pump to hydrobooster. I have...

So my cucv is converted from 24v to 12v. The problem I'm having is its not charging, it's only charging 12.3v . I changed the voltage regulator a couple months ago and it was charging just fine at 14.5v, then the other day I checked it and its back to 12.3v. I changed out the alternator, but...

So glow plug solenoid went out a while back replaced wih new one and it was getting hot and went out. So i replaced it again and its still getting hot. So i have my main power on a big stud the glow plugs on the other big stud and the pink with black strip wire on the switch side and the green...

I bought an aftermarket spin on fuel filter and base to swap out the old one on my cucv since the original was leaking. Was wondering if the dummy light will always stay on or if I would run into any issues since there is 2 or 3 connectors that are on the old fuel filter housing. Hope y'all can...

I have a 84 cucv. Throttle cable is not right the pedal sits half way down than where it should be and I think thats why I'm not getting the power I need. I have a couple pics of how the cable is and pedal is and a pic of where the pedal should be. Also on the IP has to nipples where you can...

Back again fellas. Well I was doing the front crankshaft seal a couple days ago while doing that when I was taking off the belts by accident the right alternator hit its bracket and sparked. I finished the seal fixed the eyelid terminal for the alternator, cranked it up and GEN lights inside the...

I have a problem with the light not working all the time. Exaple went out cruising yesterday and when it started to get dark and i headed home i flipped the little switch next to the main pull out light switch and nothing so i made it home and later on the night i went outside and messed with it...

This is my third post and I'm getting a lot of feedback! Thanks guys. So let me start of by what kind of fuel additive can I use? beside 2 cycle oil which I was told I could use. What kind of fuel system cleaner could I also use since it has been sitting for a while til I started messing with...

Hey guys, hope y'all can help me out. But i got my CUCV up and going and driving it once in a while. But the bad thing is, it shuts off once in a while like if I'm at a stop it'll just turn off. But it'll crank and start right up after. Or sometimes it'll crank a while til it starts. Any ideas ??

how's everyone doing, I'm new to this so help me out. I just bought my first CUCV couple months back and finally got around to fixing it up to start driving. I'm just curious on the conversion just in case I need to buy a starter and can't find or afford a 24V at that moment. so I hope someone...